The manual of my new Bosch Nexxt tells me to run a spin cycle with a small load. This is supposed to help with leveling, and it seems to be hinting at a spin only cycle. I can't figure out how to make it spin only. The manual hints at a spin only when it talks about the Refresh option.
Thanks for any hints!
Make sure you remove all the shipping bolts per installation instructions then rock washer with hand and screw legs down till it doesn't rock then load an go call me back if any problems
Unfamiliar with your machine; why not try by putting your machine on, inserting the small load (there shd be a small load button), then pressing the "spin" only function - & then "start".
Washing machines are much more complex than driving cars, the manuals dont print that. They are close to outer space modules....
419 views
Usually answered in minutes!
Solution #1
If I could find a "spin" only function I would press it. There is no spin button or selection that is obvious.
Solution #2
Yes of course the shipping bolts are removed. I'm not saying it won't spin I'm asking for the magic buttons to make it do a spin cylce with no water added. The manual hints at this but no telling how.
The only way to get it to spin, is to totally run a whole new washing program. And this machine is supposed to be energy efficient? Even after running the load thru another whole cycle; no spin at all. You could count the rpm's, at about 60 to 120 a minute. I could spin the clothes faster by hand. Bring back the "scrub board"!!
same problem, after the cycle is complete, comforter is still wet but no spin only option....
I have the same problem. I ran a load of "hand wash", they are dripping wet, and I'm looking for a spin only feature. I cannot believe I just spent $900.00 for a washing machine without this simple feature! Not happy at all.
×