Question about Navman iCN 520 GPS Receiver

1 Answer

Navman iCN 520N disassembly

The screw which holds the pivot for the folding antenna on the rear of my iCN 520 has come loose (I found the screw) - this has allowed the pivot pin to fall inside the housing of the GPS.
How do I seperate the 2 halves of the case so I can gain access inside? I have already removed the 4 screws on the rear of the case, but something is still preventing it from coming apart.

Posted by on

  • Anonymous Oct 05, 2008

    Its tricky! Take the SD card out and watch the volume control as both these items prevent the two halves from seperating. I damaged my volume control adjustment when seperating.....

    so take care

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Press the top and bottom theres clips on the top and bottom

Posted on Mar 25, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My navman icn 520 wont find a gps signal and just keeps waiting for gps


I found that if you open out the receiver at the back and make sure it is touching the windscreen it works for me. If not I don't get a signal. It is worse in one of our cars because it has a heat reflective windscreen.

Feb 05, 2013 | Navman iCN 520 GPS Receiver

1 Answer

Removing brake lever and pivot pin on 2005 roadking


If you mean the front brake lever, underneath on the bottom of the pivot pin is an "E" clip:

http://lackof.org/taggart/hacking/supermicro-fan/e-clip.jpg

I remove them by inserting a small flat tip screw driver in one of the two "gaps" formed by the clip, and twist.
After the clip is removed, the pivot pin should be able to be pushed out from the bottom.

Depending on location/angle, you might have to remove/loosen and pivot the rear view mirror out of the way to allow the pivot pin to fully extract from it's hole.

Apr 04, 2012 | Motorcycles

1 Answer

My navman 520 will not link with my computer.comes up saying make sure ActiveSync is on.


You need to download and install the latest version of ActiveSync from:
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync-download.mspx

Also make sure to disable all Firewalls as some Firewalls do not allow the connection.

Aug 08, 2009 | Navman iCN 520 GPS Receiver

1 Answer

Navman icn 520 stuck on USB screen


I had this problem when I completely deleted the Backup folder from \My Flash Disk.

Restoring the backup folder allowed the 520 to operate properly again.

It is possible that you have a corrupted APPStartupSec.exe application. Without this file working it appears that the NAVMAN waits in USB mode for ever!

Hope this helps.

May 11, 2008 | Navman iCN 520 GPS Receiver

2 Answers

Navman icn 520 with smartST 2005


You can unlock the iCN520 and install other GPS software on it. The iCN520 can run virtually all the major GPS software available today; from Tomtom to Miomap and beyond.

Instructions on how to unlock the iCN520 can be found at:

Mar 22, 2008 | Navman iCN 520 GPS Receiver

1 Answer

ICN 500


tall buildings in the cbd reflect satalite signals causing incorect fixes. an ext antenna helps a little bit.

Mar 13, 2008 | Navman iCN 520 GPS Receiver

1 Answer

Navman iCN 520


The CD is not available for download from Navman it seems, but you can get it at thepiratebay.com. Just search for 'navman icn' and you'll find what you need, I just did. Better learn how to download torrents though! :)

Feb 14, 2008 | Navman iCN 520 GPS Receiver

1 Answer

Mcx connector


Well I have done it with my magnifying glass dentists pick & my fine nosed wire cutting tweaser, and time... But more often it is easier to Disassemble the units & simply unsolder the Female Socket from the Board and replace with a new one, then ya can buy the connectors as a pair.. ensuring proper fit.

Sep 01, 2007 | Navman iCN 520 GPS Receiver

Not finding what you are looking for?
Navman iCN 520 GPS Receiver Logo

Related Topics:

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Navman GPS Experts

Marvin
Marvin

Level 3 Expert

84619 Answers

The Knight
The Knight

Level 3 Expert

76046 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you a Navman GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...