How do i retrieve calls on my nortel norstar telephone from my home phone?

There is a chance if you reduce the volume.

PDF]Telephone Features Programming Guide - Avaya Support

https://downloads.avaya.com/css/P8/documents/100142941 AvayaNORTEL NETWORKS is a trademark of Nortel Networks. ... All other trademarks and registered trademarks are the property of their ... One-line and two-line displays . ...Memory buttons . ... Call anomalies for telephones without line buttons . .... Select how you dial your calls . ... Receive a busy signal on an internal call .

Norstar How to program phone how to program voice mail ...

www.phonserv.com/1_PDF_user_guide_meridian_norstar_phone_syste...

Nortel Networks Meridian Norstar How to program voice mail phone feature codes ...Modular ICS KSU must be programmed with an M7310 or a M7324 telephone. ... Lift handset, press Voice Call key or press the Feature button, then press 66 2. .... At the LOG: prompt, enter your mailbox#(extension #. and your password all ...

[PDF]N QRTEL NORSTAR

Not to be too obvious, but did you mean Feature*98?
Even then, it should be F*981, or another in that group:

Voicemail Feature Codes Norstar Meridian and Nortel BCM Help Guides

Is this on NOrtel or IP Office? Which NOrtel system?

Hi there...

OK, the Nortel T7208 set works only on a Nortel system.
It has only one line cord plugged into it, cause the telephone system can be programmed for more telephone lines and features from the system.

If you want just a home (analog) telephone service; look at Aastra/ Telematrix/ there are others - 2 line sets.

ONLY buy this Nortel set is you have a Norstar system. Otherwise the set will not work for you. It needs a system to run off.

Good luck in your search!

You use the f985 to reset the password. But i cannot publish the password here. It is in your vm manual.

Unplugged the phone for 60 seconds, then plugged it back in.. all fixed...

If you have call log set up you can access the log log by pressing feature 812. To program that feature as a one touch button press feature *3, press the button you what to be call log and enter feature 812

Not too sure what type of manual you are looking for, but here is a useful link to have for a Norstar system information.

http://www.alphatelecom.ca/meridian_norstar_manuals.htm

Feature *1, Press the desired key, dial the #