WHEN I RECORD A DVD IN MY MWR 10D6 DVD RECORDER IT IS NOT ABLE TO BE PLAYED IN MY OTHER DVD PLAYER WHICH IS A TOSHIBA. WHEN YOU PUT THE DVD IN IT ALWAYS SAYS PLEASE CHECK DISK. THIS ONLY HAPPENS WITH DVD'S RECORDED IN MY MWR 10D6.

Unfortunately, the Magnavox MWR10D6 recorder can not record HD signals. It's only video inputs are coax (RF) and composite video; both are limited to 480i (SD). NTSC (analog signals) are translated to video.

Your best recording option is to connect the composite video output of the Dish receiver to the video input (yellow for video, red and white for audio) of the recorder. Then set the receiver to the channel that you want to record and set the recorder to Line In.

HD recorders may exist. They are much more expensive than the SD versions.

I wish that I had better news for you. The manual for the MWR10D6 is available from Funai here: http://www.funai-corp.com/support/om/MWR10D6.pdf .

Cindy Wells

need user manual for a Magnavox MWR 10d6

Check to see if the dvd format or brad they were recorded on is compatible for playback on your console. Check the manufacturers website for details.

Here is the manual..
http://tv.manualsonline.com/ex/thread/view/idThread/72198
Thanks for using FixYa - a 4 THUMBS rating and POSITIVE TESTIMONIAL is appreciated for answering your FREE question.

I can help you with your URC-3021 Universal Remote Control.

To control your Magnavox DVD recorder, I recommend using the URC-3021 One For All URC-3021 Code Search, or download the Urc-3021 Code List.

I hope that helps.
_______________________________________________
Reassign URC-3021 Device Key
One For All URC-3021 Code Entry
Urc-3021 Code List Download
One For All URC-3021 Code Search

Sure you can... connect a cable from the Output jacks of your DVD player and attach it to the Input jacks of your Magnavox the same way you connected the TV. You'll need to use your remote on the Magnavox to change the Input it records from so it conforms with where you plugged the cable into.

should have avi scrat out at back of DVR place scrat lead here and the other end into avi scrat input on your DVD recordable & feed to screen as normal.
if no scrat scoket avaible you can get a converter to switch from one to other.See your local dealer.
And happy days of u go.

from what i could find it will record on DVD+R • DVD+RW only

You have to finalize the disc. if the disc goes to the end it will finalize the disc automatically. If there is some part of the disc not used you have to do it yourself. IN DVD MODE PRESS SETUP, THEN DISC EDIT, THEN FINALIZE. FINALLY PRESS YES. That should do it.

does the player turn on? it might be a display setting on your tv- meaning it has to be on a set channel or mode to work