Question about Planar PT1510MX Monitor

Open Question

I have a pt1510mx, and it turns on but stays on (with picture) for 4 seconds, then it goes black (led still green), and I have to turn it off and on from the power to see the screen for another 4 secs then it goes black again, and I have to turn it off and on to see the screen for another 4 secs. Any help !!!

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: monitor goes black 1 second after coming to full screen

I have 2 systems with the FPD1500 monitor. They worked fine until I applied

SP2. After SP2, they will not start. They come on OK, display the Windows

XP splash screen and then go into sleep mode when the system starts the

proper display mode before the Windows XP login screen is displayed. If I go

into safe mode and uninstall the video adaptor and restart the system, it

will start properly. After it comes up, it finds the video adaptor and

installs it and the session proceeds OK. I can reset the resolution and

number of colors to 1024x768 and Highest (32 colors) and things look fine.

However, when I restart the system, it hangs up after the Windows splash

screen and the monitor goes to sleep.



If I put it into VGA mode, it will come up OK. But once I change any

resolution or number of colors, it imediately goes to sleep.

I would appreciate any help you could offer.

Posted on Aug 26, 2008

Ad
  • 106 Answers

SOURCE: screen goes black after 2 seconds

This could be one of two problems, the light in your monitor has a loose cable, or the light is dying. I have seen cold cathode lights that are about 10-15$ to buy and many instructions on putting them in yourself.

Solution 2, your cable is loose on the back of the monitor. Make sure you have the screws tightened on either side of the vga or dvi cable, both on the back of your monitor and on the back of your computer or laptop.

Posted on Jun 28, 2009

annual_uk1
  • 70 Answers

SOURCE: Planar PE191M monitor display will not stay on

iv come across this before sometimes people can see that the monitor is actually working but the light has gone out id say bad capacitors that are breaking down. if you want to DIY it take it apart and find the light pcb usually built on the power supply pcb and look for bulging or swolen capacitors this happens alot in my opinion. if you can DIY it get the same caps or same value but better ones. I might be wrong but worth a look

Posted on Aug 22, 2009

joegoldman
  • 335 Answers

SOURCE: pl2010m orange standby light, black screen

Try booting the pc in safe mode (press f8 at startup). It may be possible that the pc is trying to send too high a resolution to the monitor...unlikely though. The symptom you describe usually indicates that the power board or the inverter board in the monitor are defective. If it does the same thing in safe mode, you have 2 options.

1. Replace the power board and inverter board (do the inverter board first.......it's the cheaper one (10-20 dollars).
2. Send the monitor back to the seller for a refund, or get a new monitor.

Sorry I couldn't give you more positive feedback. Hope this helps.

Joe

Posted on Oct 13, 2009

paulbtorrent
  • 34 Answers

SOURCE: ACER AL1914 LCD Monitor goes black but green light stays on

The monitor is doing a self test a finding an error.
The lcd has three parts, the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self test check that all the lights are ok and the inverter is ok, else it switchs off, ie if 3/4 light work it will switch off(my own case), hence the on chech error then off, However sometime there are stages of on/off ie on/ but no screen display, if that is the case the following may be of help...if you put bright light at an angle close to lcd can you see a windows shadow, text icons etc, ie still logic power passing,then .... (from a.n. other) after two weeks searching I finally find doctor living stone http://www.aplusperfect.com/articles/lcd_capacitor_repair more fun with paulbtorrent
the takening the case bit off is like opening your wallet a second time after buying a new LCD, but you must! smallest two screw driver's flat headed, practice using two pennies stuck together()with your fingers after, one little () move and inch and {} again, with the case , it does not break, just need to lever open
[once open you realize they somehow put that old briefcase clip inside!] also note the bright light test to do first to see if can see a windows screen , and that capacitors are one for a number of things that a make a inverter work! there a transistors as well, given that however, to replace all the capacitors on my inverter, was 11 capacitors, cost me $11 (uk ebay) and already had the iron and solder. So only cost me me $11 to try and see but no luck , still fun and I still can see the screen for 2 sec' at a time plus I have a spare set of caps now in the event that the new one do go burst! you have to laugh really, what next , a new on/off button, as you work though the whole inverter mmmMMMMmmmMMMMmmmMMMMTim Berners-leeMMMMMmmmmMMMMMmmmmcome back all is not wellMMMMMMMMMMnnnnnnweek later land sight mmmmmMMMMMMMMMmmmmgggggggg(from
another a.n other)Generally, if the screen went out quickly, it was the inverter. If it went out over a slow period of time (flickering etc..) I would bet it is the lamp.replaceing the lamp should be pretty challenging. as that requires complete breakdown of your LCD, extraction of your dead lamp, and soldering in your new lamp... but I would like to say that I it did this after realizing it's 2 x kitchen strips inside [========] with wires that can connect back to the inverter with out any desoldering(ie kit assembly/dis) with the outter case remove (glass plate safe away) I could reconnect and see that 3/4 were working (i!i hardcard ) cause the inverter to switch off after a secound ! order bult and replace and going
to cheap and see if I can get away with fitting a 15" in my 19' as it a 1/3 of the price ! the market as drop out there, hope the inverter does not miss the length, or the screen out put.http://www.lcdparts.net/howto/troubleshooting/LaptopCCFL1.aspx OR MONITOR

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I turn on my Sharp TV the picture comes on for a second then goes black. The sound is working but the picture stays black.


hi quick test, in a dark room shine a flashlight on the screen, if you a can see an image, bring the menu up if you can see it the led or leds in panel may blown, thanks

shaun

Feb 15, 2017 | Televison & Video

1 Answer

Technika x22/14c Screen goes Black after 2 seconds


David, I would put my money on a new power supply board. , be sure u get the #'s off the board itself. there are many such boards and they look alike but they might not work. Just be careful they still carry a Charge and will Zap u .. even thought the Caps don't look blown it could be just one of the legs on the square Cap. just replace the whole board..

Feb 18, 2015 | Samsung UE40B7020 40 in. LED TV

1 Answer

I TURN MY TV ON IN A FEW SECONDS GOES BLACK .BUT THE GREEN LIGHTS STAYS ON


The internal power supply is failing. The green light merely indicates that house power is getting to your TV

Aug 08, 2013 | Viore 32" LED LCD HDTV

1 Answer

When turned on, screen goes black, but power light stays green


It sounds that the main digital board to this TV is faulty. Contact any service technician.

Jun 26, 2013 | Sanyo LCD-42CA9S VIZON MULTISYSTEM 42" LCD...

1 Answer

Hello, I have a ViewSonic N1700w. I have hooked it up correctly(all drivers downloaded, proper connections, etc.). When I turn it on the power led blinks until there is video or graphics to display. When...


it sounds like the inverter was defective, the monitor will be fine for few seconds then go off but power light still stay on with Green. You can contact with manufacturer for repair service if it still under warranty.

Mar 22, 2010 | Computers & Internet

1 Answer

Monitor comes on, I can see everything perfect then goes black


"Most" newer monitors will let you know if the are no longer receiving a signal. Sounds like the backlight is burnt out. Try getting a bright (LED works best) flashlight and shining it at the screen at all angles to see if you can see any of what you were doing. If the backlight is on the fritz, either return it on warranty or buy a new one.

Jan 31, 2009 | Westinghouse L2046NV Monitor

1 Answer

Sony green power/standby led blinks picture goes out


I had this same problem and after doing some research, I removed the lamp, cleaned it and plugged it back in. It fixed my problem completely.

Mar 22, 2008 | Sony Grand WEGA KDF-60WF655 60" Rear...

1 Answer

Monitor goes blank less than a second after turning on.


I start my computer and turn it on, and everything looks fine for about 1/4 of a second and then it goes black while leaving the power light green. I can only see the screen again after turning it off and on, but that's only for another 1/4 second. What's up?
I got my rosewill flatscreen as a hand me down from my father. I've had it for several years now. Was working fine until a month ago. When I turn the computer on the screen goes black after 1/4 of a saecond. I have to turn it off and on anywhere from 10 to 20 times before it stays on. I have checked all plugs to the computer and outlets. I have absolutely no idea whats causing this.

Dec 28, 2007 | Rosewill R700J 17" Flat Panel LCD Monitor

1 Answer

Monitor goes dead AL1914


Try connecting the wires properly. try changing the VGA cable. i had the same problem my screen goes black some times and pink i changed the VGA cable it was absolutely fine!!!
What is VGA cable
VGA Cables Adapters Converters and Devices C2G

visit a computer mechanic for further trobleshooting

Mar 17, 2017 | AcerView F51 15 in. Flat Panel LCD Monitor

Not finding what you are looking for?
Planar PT1510MX Monitor Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Planar Computers & Internet Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

William Miller
William Miller

Level 3 Expert

9156 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Planar Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...