MTP Error When the YP-K3 4 gb device is plugged into the USB Port, the system says "Found New Hardware, Samsung YP-K3" which then switches to "MTP Device" and then fails on an MTP error. It seems to be searching for a driver, and cannot find one. H E L P!!!!!

Hi, kindly get it downloaded at : www.driverskit.com/MP3/Samsung.html
www.nodevice.com/driver/.../Samsung/MP3_Player.html

Regards, Jay__GT

Usually you fix this disconnecting power plug for two minutes and plugging it back

You need to upgrade your player’s firmware if you experience any of the following:

• When your attempt to use the player, the Found New Hardware bubble appears and then flashes between several messages including MTP Connected, Don't Disconnect, MTP Device found, MTP Device may not work properly, or There was a problem during installation.
• The player constantly appears and disappears in Device Manager or appears in Device Manager with an exclamation point indicating an error.

• Your computer sounds the connecting and disconnecting chime when you connect the player to the USB port.
• The player does not appear in My Computer.
• Uninstalling Windows Media Player 11 and using Windows Media Player 10 corrects the issue.

• When you use the player on another PC or laptop, it works flawlessly.
• Your player was working properly with Windows Media Player 10, but you’ve recently upgraded to Windows Media Player 11 and your computer no longer detects it.
• Go to Samsung.com, enter in the model u have in the search area and then go to support, this should fix the problem!

1. Connect the USB cable to your computer.
2. Press and hold the button while plugging the other end of the USB cable into the YP-Z5.
3. When the display shows USB Connected, release the button.
4. The device is now in USB mode.
5. When through, you must safely remove the USB device. Note: To safely remove the USB device, right click the USB icon ( ) in the bottom right of your screen, and then click Safely Remove Hardware.
   

1. Upon disconnecting the device, it will return to MTP Mode.

nothing to power

Found the solution on another site (http://www.everythingusb.com/forums/showthread.php?threadid=11238). To quote user AFHavemann :

"* Plug in the player so the USB bus can see it.

* Once it’s recognized (i.e., the device screen reads "Charging" and "USB Disconnected"), go to the Control Panel and click "System"

* Choose "Hardware" then "Device Manager" tab.

* Look for the name of your device under “Portable Devices” in the list

* If the name of your player is under “MTP Device” then the correct drivers are probably loaded

* Right-click on the name of your device and click "Properties"

* Click “Update Driver”"

Then follow the prompts from there. The computer searches for the driver software, etc., and reinstalls/resets information related to the device, which fixed things such that the computer will now recognize the device. I'm not sure what causes the problem, but this solution seems to reset whatever's gone wrong.

SOLUTION FOUND!!! NO DRIVER PROBLEM ...Right click on my computer,go down to properties ..next window click the hardware tab,then click on device manager...right click and goto properties on ALL your "usb ports"...goto power management and uncheck the power saving box for every usb port,and click ok,then restart.!

I think I got it guys. forget WMP 9,. 10 , 11... I run win xp service pack 2 and could not install the samsung yp-u3 player. I kept having it found as a new hardware {portable device} but as we all know this software has no drivers, and the windows update produces MTP device error. Resulting in you not being able to see your player in XP. Well go to windows update site and search for a file called "mtppk12.exe" I'm pretty sure once you install that file and reboot, you will no longer have MTP device errors. However, I installed this at the same time i installed windows media player SDK. So maybe both files are required. Finally after 2 days of troubleshooting i got mine to work.

I think I got it guys. forget WMP 9,. 10 , 11... I run win xp service pack 2 and could not install the samsung yp-u3 player. I kept having it found as a new hardware {portable device} but as we all know this software has no drivers, and the windows update produces MTP device error. Resulting in you not being able to see your player in XP. Well go to windows update site and search for a file called "mtppk12.exe" I'm pretty sure once you install that file and reboot, you will no longer have MTP device errors. However, I installed this at the same time i installed windows media player SDK. So maybe both files are required. Finally after 2 days of troubleshooting i got mine to work.

hmm i got the same problem as jenn1519 ill plug mine in and when i usually plug it in the computer makes a bing noise like it recognizes that its in the usb plug but 2 seconds later it will make the bong noise that i unplugged it which i didnt so i cant put any new music on. it will charge but it wont let me get any music on. and windows doesnt read that its in there.
and also my mp3 player is very important for me its a gift from a friend so plzz plzz help ? :(
tanko!!!
its ma emil add [email protected]