Backround sound is fine but voices speaking are muted

Hello,
You might need to update the drivers in your computer. Scan it with RadarSync so that it will detect the drivers which are outdated. You can use the same software to update them all.
David

If you are using headphones, try this...
http://en.kioskea.net/forum/affich-412724-music-but-no-voices-play-in-headphones

Some sets have a theatre mode with Hall, etc this usually causes the problem you describe.

Check the connections to the centre speaker which is where the actors voices come from.

Hello

Yes, fortunately this is only a minor setting which needs to be set right. Although i have never worked on this unit before, all you need to do is to have a look on the remote itself.

The problem is that the player is set to play through the wrong channels. Hence, you can hear the background music and sound, but not the voices. This is because the voice is sent to a channel which does not exist.

On the remote there is usually a button saying channel or sound channel...Something in this line. This will enable you to cycle through the sound channels(2.0 ; 5.1 ; 7.1 etc)

If you cannot find this button on the remote, you will need to have a look around in the sound setting menu.

Hope this can be of help.

Kind regards
Andrea

try resetting the equalizer in your wm player...

I would check your center speaker wiring and setting. Then switch to a different audio setting (pro logic, theater...)

Hi....

If your system is set up for surround and you dont have a center speaker that will happen.
Check the manual for best setup

Need more info. Does it happen while using other sources? (DVD, games, VCR..) if so, pause the source and see if the sound is still audible. if it's only on the TV source then MUCH more info will be needed.

I am having a smilar problem, I think the aux jack itself is messed up. I lose the sound out of the left channel, then I jiggle the connection a bit and get the sound back... Often when you can hear instruments and no voice you are hearing only a left or right track. Are you sure both the left and right is working?