CD135 phone answerphone function has stopped working

Either you must set your home answering machine to answer on fewer rings OR disable the phone company's message system.

are u using BT1571?

usually there is a small slide switch on the side of the answering machine that you can use to control how many rings before it answers. if that is a new digital model you will likely have to go into the menu to set it up. often your choices are two, four or toll saver.

robert

Please take a moment to rate this solution thanks

Try the link below.

http://phone.manualsonline.com/ex/thread/view/idThread/2082787

1) Press the 'tape' symbol to access the answering machine mode.
2) Press 9 then 1 for 'answer and record'.
3) Whe you hear a 'beep' speak your message. Whilst recording the display shows REC OGM1 or REC OGM2
4) Press 5 to stop recording. Your message is played back to you
5) Press 'tape' symbol to exit.

To check your Out Going Message (OGM)

1) Press 'tape' symbol
2) Press 6 then 2 and the message is played back.

Hi, flashing indicator light was simply the answerphone memory full

Regarding the Philips SE445 cordless phone/answerphone. I posted my problem where it rings 4 times then continues to ring without cutting into the answerphone. My phone is now fixed and working as it should which is great. I was unable to make calls because I had no dial tone and although Virgin checked my line and said it was fine, it obviously wasn't. The problem was with the line in the Exchange Box - the big green boxes that are located on the roadside - the line was broken there. Once fixed, I had my dial tone and the SE445 is working perfectly. To nomad1066, I would insist that BT check their Exchange Boxes as this is probably where the problem lies. Check whether you have a dial tone. Hope this helps.

press bottom left button and then hold down 7. display will show 0-0 to indicate its turned on. 2 to read messages. 3 to skip to next messge. 4 to record your message. 5 to listen to current welcome message. 6 to delete messages. 7 to activate answer machine. 9 to deactivate ans mach. 0 to record internal memo. To use any of these functions bottom left button must be pressed first.

Hi there Fred

Here are links to user guides for your unit. Good luck, thanks for using FixYa

http://www.p4c.philips.com/files/c/cd1302s_73/cd1302s_73_qsg_eng.pdf

http://www.p4c.philips.com/files/c/cd1353s_05/cd1353s_05_dfu_eng.pdf

regards
Graeme

hi, do you have instruction manual i cant find mine. i have been using an other phone and gone back to this one but need to change answer machine message can you hlep please. patem