Ive tried to set the time taking note of your cmments but cannot get anything like "chime" to come up - Ive set the light to "ON" the date is okay but I cannot alter the time - why do these people send the wrong instruction booklets out with the watches
I finally figured out how to set the time on this watch! Like others the included manual didn't have instructions for this model.
Hold down all four buttons on the watch, this will do a factory reset.
Hold down the top left button, which brings you into the configuration mode.
Pressing the bottom left button will cycle you through all the settings for the time. For each setting, the top right button increments and the bottom right decrements.
When you are done, press the top left again.
To set the time or be able to turn off the chime do the following:
Press the "Set/EL" and "Mode" buttons down at the same time and hold until the "light = off/on" is hown on the display. Use the "Mode" button to cycle through the options.
I have no idea why it does not say this anywhere in the book. Looks were way more important on the design on this watch than the function.
Hey guys, #4 solution is the right one. Press all 4 buttons at once and then continue with holding down the set/El button for 2 sec. Then use left lower (mode) button to move through the set up menu. Right buttons wil change values up or down. After setting all parameters, press set/El again to get back.Good luck!
To set the time for the Diesel watch DZ7069 you need to go to the following web site.www.fossilscandinavia.se-bruksanvisningar-Diesel%20Digitaler%202007.doc.url
You have to press the "set/El" button down for some seconds, and the "light = off/on" will be shown on the display. Press the "Mode" button while the "light off/on" are shown, and the text CHIME will be shown, just keep pressing the "mode" button to set the different parameters on the watch.
hope it could help?
Hi can anyone solve this problem out ...this diesel dz7069 is fucking shit ..its so complicated that i cant set time ,date and even day on it....if anyone come up with solution plz give me detailed instructions
cheers
Hold down the light button (top right) and then press the bottom left button until you get the time, date and chime settings!! :)
Same problem here! The link is dead.
Fill it with diesel
3,024 views
Usually answered in minutes!
Same problem, shop manager could not even set the time on it.
Garbage. I was provided with the wrong manual. Link provided, unfortunately, was dead
the link is dead
×