Xdvd700 bypass code

How to get code xdvd 700 for dual model

Put a DVD in and let it play *** soon as you  hear sound  press stop 2 times on your control and hit 26604 and then hook the e-brake wire to the back screw and it should work.

The way you bypass the E Brake is you have to ground the wire to the radio sleev itself. There are two different peices. The radio itself and the sleeve that holds the radio in place. Take the yellow wire (the ebrake wire, not the yellow ignition wire) and open the metal connector up just slightly. Attach that wire to the top of the sleeve on 1 of the teeth located near the front of the unit. You have to make sure that the connection is good or it will not ground. Next slide the clear plastic over the wire so the only connection is with the tooth.
Then Insert a cd or dvd in the player. Press play on the remote and then push stop 2 X times on the remote. After you have done that press 26604 on the remaote and then press enter. This will permanently unlock the parking brake feature and allow you to watch dvds while in motion. If you need any further help you can eamial me at [email protected]

I have a xdvd700 and replaced battery in truck have a picture but no sound from unit. tried resetting code and still have picture.

Which one is the back screw

Try 1264 for the xdvd700

I cant get the antitheft code off my dual xdvd700 i took the battery out now it shows code someone please help me

How to get code for xdvd 700 for Dual

You haft to get a toggle switch hooked up it tricks the emergency brake wire makes it stay on even when driving

Just ground the pink wire and it will work