Im trying to play music through my sound card and talk on the mic in paltalk i got SB1090 and it sitll dosnt work

go to control pannel and hardware and sounds check the settings as ur **** has been taken as ur out put..

With this kit being acoustic-electric, the only advice I can give is to disconnect your snare trigger and mic the snare. It's either that, or your snare trigger is faulty. A new trigger is going to cost about the same as mics, but mics won't hit your snare, making you sound inexperienced. For miking the snare, you'll want to get two mics, placed on the top and bottom head. Try to position them on the same spot on the rim to avoid voicing problems. Studio drummers do the same thing when recording.

For playing this way live, you'll want to use either the main PA, or run to a separate mixer so you can control the volume of the snare in relation to the rest of the kit.

Hope that helps!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/cameron_463100ffd54b591d

Hi friend,

firstlt go to the control pannel and select the open printer and faxs,right clieck on the printer and set to online.

Thanks,

Please rate me........

You need to Control Panel\Hardware and Sound\Manage Audio Devices. Under the "Communications" tab make sure "Do Nothing" is selected.

lol. no im sorry. I'm tell you that there is no built in mic unless there is a built in cam. if you have a built in cam try recording a video with sound. talk laugh play music. Then play it back. Also you can click Start then All Programs then click Accessories.
Now click Entertainment then Voice Recorder. Test to see if it plays you voice back. Sorry for the misunderstanding. Happy Holidays!

Hi I'm mhel, try to re install your audio driver and if this not work you can try to replace your head phones with a new one thats maybe the cause, but if this doesn't did the job you might have a faulty headphone jack. Consider a hardware repair. good luck

mhel
[email protected]
[email protected]

Your Mic input could be muted

If when you talk into your mic you hear yourself from speakers...open your volume control(windows) and check the box to mute mic. Not for sure this is a fix to your problem but from what you wrote is similar to problem seen with voice chat software.

go to device manager and check if there is mic internal or not-and check user manual sound section.

ya you gota go the, assories, the system sounds, or something like that. You need to make the Logtec your mic and headset. Then it will just work, open mic no button to push on COD4. I think it may be adjust sound levels, or something to do with sounds under the assories settings.