My PX-E860 turns on, but will not spin. - Aiwa PX-E860 Turntable

Some help here, but likely connections not in the right place.

https://www.google.com/search?q=Aiwa+PX-E860+connected+to+Technics+ST-HD560+has+no+sound

..

If you put the maker and model number into Google you will find a service manual free for the make. That should help you sort out the problem. It's just a question of getting the weight at the other end of the arm adjusted right.

Will this help?
http://www.manualslib.com/manual/207101/Aiwa-Px-E860.html?page=2#manual

I don't think you can find this part easily and new and honestly it doesn't worth it.
I would suggest to go for this or something similar


Aiwa Stereo Full Automatic PX E860 Turntable System

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Aiwa-PX-E860-Turntables-manual/id/1077bh126/t/2/

Select the record speed.
Press the 2 down arrows or triangles( placed side by side) - This the same thing you press if you want the styles to lift during play
Place the stylus on the desired spot.
Press the same button again.
The stylus will drop to the desired spot & continue playing

If you have the manual look it up, else download one from this site after becoming a member(its free)

http://www.retrevo.com/support/Aiwa-PX-E860-Turntables-manual/id/1077bh126/t/2/

my aiwa PX -E800 TURNATBLE has stopped working ,, is there anywhere i can get a replacement turntable .

Regards

Trevor

try this company?


mailto:[email protected]

There are zillions of belts out there. I hope you still have the broken one which will give you the profile of a new belt. Measure the diameter of the sub-platter under the platter. The belt you need well be a slight stretch fit. Then, with the platter back in place, slip the belt over the motor pulley making sure it is not twisted.

Don't understand. If it doesn't turn on, how do you know the electronics are ok? More than likely your transformer shorted, and will need to be replaced.