Kitchen Aid KESC307 Electric Range oven shuts down unexpectedly

It sounds like the control board of the timer is faulty. Do you need the electronic timer/clock. If you don't it is normally easy to by-pass the timer altogether. Find the main active wire coming into the timer. Then identify the load wiring which runs from the timer to the oven thermostat control. These two wires simply need to be connected and the timer is bypassed and the oven will work.

You may need to see the secondary error code (F1-E?). The chart below is for a KitchenAid Range. Most likely is a control board issue. We rebuild control boards if you want to save some money compared to new.

Replace the electronic range control ERC

the operating feature i that it will not let you open untill the oven has either fineshed cleaning or the oven has cooled off

have the same problem with kitchen aid stove. Set the cook duration for one minute - then open and closed door. Oven turned off.

Electronic range clock failure. You will need to replace this part. It is located where your keypad is. You will need to get behind it and pull the part out and replace it with the exact kind from repairclinic.com

You will probably have to replace the electronic range control.

i had the same problem with mine.. i overboiled some water and it leaked down the front onto my panel (inside).. i had to replace the whole thing.. (i did it so i added a silicone bead inside so water cannot get to that same panel area)..

3 years and it still works..

replacement panel is about 120.00 CAD

soundsl ike youve blown a thermostat on the back wall of the unit(fairly common with the K/A appliance, unit wikk have ot be pulled out to check continuity on the thermosts( loactated behind back wall just between the broil element hook ups.

oven not workin very well might be a control issue, but top elements work completly seperate from oven control, and theres 2 electronics there $200 for touchpad galss assy and $375 for electronic timer, and switches for the burner might be 50.id make sure I trusted the repairman's diag before proceding