Question about Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

How do i do a wireless connection between computer and a kodac 5100 all in one printer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 987 Answers

Http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/5100AiOPrinterUG_EN-US.pdf
follow this manual ...

  1. Check the Wi-Fi Status Indicator on the front of the printer:
  2. Status: Do the following: Off
    1. Select Menu (or Home)>Network Settings and press OK.
    2. Select Turn Wi-Fi Radio On and press OK.
    3. Select Wi-Fi Setup Wizard and press OK.
    4. Select the SSID (name) for your router.
    5. If you have your network secured, you must also enter your password.
    Blinking
    1. Select Menu (or Home)>Network Settings and press OK.
    2. Select Wi-Fi Setup Wizard and press OK.
    3. Select the SSID (name) for your router.
    4. If you have your network secured, you must also enter your password.
    5. NOTE: If the message Your printer is already configured for Wi-Fi network appears, your printer cannot find your router.
    6. If this occurs, check that the router is turned on and located within 100 ft (approximately 30 m) of the printer.
    On The WiFi Status Indicator could be on, but you could be connected to the wrong router if you used the manufacturer's default SSID and password when you set up your router. If this is the case:
    1. Select Menu (or Home)>Network Settings and press OK.
    2. Select Wi-Fi Setup Wizard and press OK.
    3. Select the SSID (name) for your router.
    4. If you have your network secured, you must also enter your password.
  3. Select Menu (or Home) from the printer control panel on the front of your printer.
  4. Select Network Settings and press OK.
  5. Select View Network Configuration and press OK.
Place the KODAK All-in-One Printer Software CD into the CD-ROM drive on your computer.
Follow the on-screen instructions. Do one of the following depending on the version of KODAK All-in-One Home Center Software:
  • When the KODAK Printer Setup Utility screen appears, select how you want your printer to be connected:
    • USB cable
    • Wireless Wi-Fi® connection
    • Ethernet cable

Posted on Oct 12, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 15 Answers

SOURCE: kodac 5100 AiO printer--how to scan pic. and send

Connect your printer to the computer and make sure that you have the latest Kodak All in One Home Center software installed on the computer.
To download the latest version of software, go to the link below:
kodak.com/go/5100downloads and install the software.

You can scan a picture either by using the scan button on the printer or by using the Kodak Home Center software.

There is one more way of scanning the picutre from MS Paint application in Vista and XP.

  • Open MS Paint and go to the "File" option on the top left.
  • In the Drop down menu, select "From Scanner or camera".
  • It will give you the choice to choose the desired USB device so selct the Kodak printer/scanner and the file be scanned in Paint.
  • Now you can save it as an image on the computer.

If you are looking for a manual, go to the link
kodak.com/go/manuals
On this webpage, you can view and download manuals for all Kodak printers as an Adobe(.pdf) file or as .html file.

Posted on Oct 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Find a printer that allows me to run Windows XP safely? I have an old computer that is running XP home. I have been advised that all newer printers will not work safely with XP. Where can I buy one


I have a kodac ESP Office 2150 printer and I still have my windows xp on my computer and it works great with windows xp it conects with cable or Wi Fi but I don't have any problems with it!

Jan 04, 2015 | Microsoft Computers & Internet

1 Answer

Hi I have a Dell inspiron 5100 lap top. I have


  1. Right click my computer
  2. go to properties
  3. device manager
  4. you will see network adapter and under that will be wireless adapter
  5. click on wireless adapter
  6. go to properties
  7. See if device is working properl

Dec 02, 2009 | Dell Inspiron 5100 Wireless Mini-pci...

2 Answers

How do I set up my kodak easyshare wirelessly?


Depends if you have a wireless model or not. With this amount of information I'd suggest you go to www.kodak.com/go/wifi

Oct 20, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Kodac 5100 AiO printer--how to scan pic. and send to computer file...can not locate manual


Connect your printer to the computer and make sure that you have the latest Kodak All in One Home Center software installed on the computer.
To download the latest version of software, go to the link below:
kodak.com/go/5100downloads and install the software.

You can scan a picture either by using the scan button on the printer or by using the Kodak Home Center software.

There is one more way of scanning the picutre from MS Paint application in Vista and XP.
  • Open MS Paint and go to the "File" option on the top left.
  • In the Drop down menu, select "From Scanner or camera".
  • It will give you the choice to choose the desired USB device so selct the Kodak printer/scanner and the file be scanned in Paint.
  • Now you can save it as an image on the computer.

If you are looking for a manual, go to the link
kodak.com/go/manuals
On this webpage, you can view and download manuals for all Kodak printers as an Adobe(.pdf) file or as .html file.

Oct 11, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

I can print from main computer, but are now unable to print from wireless laptop, which I could 2 week ago


assuming that your printer is physically connected to your main computer, and that your laptop is wirelessly networked with your main computer,

then you need to have the main computer on as you attempt to print from your laptop

Oct 03, 2009 | Acer Aspire 5100 Notebook

1 Answer

Wireless connection


hi,
welcome to fixya.com
yes offcourse ur dell inspiron 5100 laptop support wireless connection,and it will detect the wireless connection in ur computer,uninstall and reinstall the wireless driver and then try and connect to wireless connection,and what u can do is that reset the router and then try and connect to wireless network it will definately connect..and it will also detect the wireless signal also........good luck

pls rate this solution its a request..pls

Feb 11, 2009 | Dell Inspiron 5100 Wireless Mini-pci...

2 Answers

My kodak 5100 printer is having problems printing black text


Clean the printhead, then print a demo sheet.
  1. Verify that inkjet paper is loaded in the paper trays.
  2. On your desktop, start the KODAK All-in-One Home Center, then select the Help [?] icon.
  3. From the Help menu, select Maintenance, then select Printhead Cleaning. The On/Off light flashes green during the cleaning procedure.
  4. When the On/Off light glows a steady green, press Photo and Copy simultaneously to print a demo sheet.
If the Demo print is bad- IE: no black, blurry print etc., then you may need to replace the printhead:
http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/printhead/AUR1780-9_UE_RevC.pdf
Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Dec 31, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Cell phone photo xfer


att/lg will not allow bluetooth wireless xfer of phots to a kodac kiosh... so i purchases amini memory card(which comes with a scandisk micro adapter.) i used my handset phone to move each photo to memory.......then used the card to xfer to my printer/ computer.. long process, but it worked...... thanks anyway...... i will keep you in my address ' RONZ5

Mar 31, 2008 | RIM BlackBerry Pearl 8100

1 Answer

Wireless Network Connection is very weak


Is the router near to any electrical devices that could be causing interferance? Try putting the router in a different location.

Dec 29, 2007 | Acer Aspire 5100 Notebook

Not finding what you are looking for?
Kodak EASYSHARE 5100 All-In-One Printer Logo

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...