Printer keeps flashing wrong cartridge with correct cartridges

Try cleaning the printhead and the area inside the print where the print head connects. Use folded tissue soaked in a bit f methylated spirit. If this still doesn't work, then it most certain that the cartridges have become incompatible and have to be replaced. Cartridges becoming incompatible is usual, sometimes resulting from expiration. If replaced with original cartridges the issue should be resolved

Good luck & God bless!

The steps to removing the ink cartridge and replacing it are rather simple. Keep in mind; however, if these steps are not done properly, there are a number of errors that could occur that could keep your printer from printing at all.

The first step is to write down the printer name and brand.

Remove the empty cartridge with care while taking care not to cause any damage to the printer.

If the user already has a replacement cartridge in his possession, then he simply opens the printer's lid while the printer is still on.

Opening the printer's lid when switched on will cause the printer cartridge seats to move into place, allowing the user to remove or reinstall cartridges.

Remove the cartridge with care then replace it with the new cartridge. Close the lid and print a test page.

The one thing to always keep in mind when changing the cartridge is to handle the cartridges with care.

If the user's ink cartridge has a print head, the user must use extra precautions to ensure that no contact is made with it.

If the cartridge has a seal at the bottom, care must be taken not to break the seal.

Are the cartridges genuine new hp, or are they compatibles, or refills? If not genuine hp, get some and see if that solves your problem.

it is problem your printer black cartridge .Black cartridge is signal E 5 color cartridge is E6.please change it you buy a new original cartridge
black ink cartridge chip is demage

my psc2410 is not working as printer,scaner and fax.power is ok.please insstruct me how to trouble shoot it

its not a true fix but I had the same issue. I turned off printer and slightly moved the paper thickness lever over a few inches. I turned it back on and the cartridge error was off. I do get a pop up from my printer program on the computer every time I initiate a print job asking to correct the lever, I click OK and it prints. I know its aRube Goldberg fix but I need this printer every day for work and for now it works.

Try unplugging your printer and starting over sometimes this will correct the problem

Doubled check the cartridge numbers and that they match what is on the printer. If no match get correct ones.

I have the multipass mp700 and have just experienced the same message ..... wrong cartridge. After reading the manual, from the disc, it means that there's something wrong with the print head, most likely needs cleaning, but it won't clean because the printer is sending a malfunction message. I will be trying to clean the head and if that doesn't fix it then I'll buy a new print head. Good luck with the problem.

replace print head. print head is bad.