I need to change my Maytag oven from celsius to fahrenheit.

To change: Press and hold BROIL for 5 seconds. A tone will sound, and "°C" or "°F" will appear on the display. Repeat to change back.I think the oven must be working to do it, otherwise contact the manufacturer for advice.

It sounds like you got the electronic oven control to expect temperature settings in Centigrade (Celsius) instead of Fahrenheit. Check your owner's manual to find out how to change it back to Fahrenheit.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

try unplugging range. If it does not return to F display
You can try this: Hold either timer keys down on power up. The right digit will display "F" or "C". The temperature display can be toggled from C to F by pushing the Broil key.
or
Press cancel and bake buttons simultaneously for 3-5 seconds until C appears then use up/down buttons to change to Fahrenheit.

Read more: http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/66531-switch-celsius-fahrenheit.html#ixzz37a4SP964
http://forum.appliancepartspros.com


Read more: http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/66531-switch-celsius-fahrenheit.html#ixzz37a4C5UH2
http://forum.appliancepartspros.com

Good Afternoon Friend,

I understand you are trying to change the display from Celsius to Fahrenheit. To convert from one to the other and back, press and hold the " TEMP/TIMER" Up arrow and Down arrow buttons together for 3 seconds. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful.

-Best Regards-
WP

If your temperature reads in climate control reads in degrees Celsius "C" instead of Fahrenheit "F", follow these steps to change to Fahrenheit.

• Turn the ignition on.
• With the climate control turned on, push and hold the recirculation button in. While holding the button in, push and hold the off button in for 3 seconds or until you hear a beep.

The display should then change to "F". Follow these same steps to change your read-out to Celsius , if preferred.

On most of these Maytag units, built by the now defunct, Fedders for Maytag ... if you press the ON/OFF button and hold it for 5 seconds, it should switch back to fahrenheit.

Hope this helped you.

Check to see if it is programmed for Celsius instead of Fahrenheit. eric

Hi, if you press in same time blue buttone(-) and red buttone(+) it will change from _ _C to fahrenheit.

In order to change the temp setting from C to F, Press cancel & bake together for 5 seconds then use the more or less pads to change.

You will need to push the broil button down for at least 10 seconds then you will see the c change to a f for farenheit