Maytag Microwave There is a dent in the stainless steel door that

Hello, Well for this unit it is a minimum of 30" from the cook top to the top of the microwave. here is the guide http://www.kitchenaid.ca/assets/pdfs/literature/Installation%20Instructions%20-%20W10238252.pdf hope this helps

Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101

Because it is stainless steel it is not likely that it will come out the compressed air and blow dryer are you best bet but it is unlikely that it will come out

I have the NN-T994 SFR model and it had a switch that was staying depressed. I removed the screws to (in my case) the stainless steel cabinet, removed the cabinet and unhooked the wires to lay it aside. Found that the switch was cracked or broken, glued it back exactly as it was, then put the cabinet back on and it fixed it! Now about a year later, I have another problem...oh well. Hope this works on yours.

I'm not sure about some of those appliances but ApplianceArt.com maybe able to help you. They sell stainless panels as well as the Softmetal adhesive stainless that's been on HGTV's "I Want that," "Design on a Dime," and "Real Estate Intervention." And I think some others.

REMOVE THE CABINET(COVER) AND YOU SHOULD BE ABLE TO SEE WHAT TO DO.

The best repair is to take apart the door panels, bang the dent pout from the other side, then sand and polish it smooth.

Otherwise, there may be some dent filler you can use, then sand and smooth it.

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the previously hidden screws you need to remove.

Or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

One way is to separate the door panels, bang out the dent from the other side, then burnish the area.

Otherwise, you can replace the damaged piece. You can usually find helpful exploded view diagrams and order parts by entering your full model number here: http://tinyurl.com/gv383

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the previously hidden screws you need to remove.

Or you can watch a YouTube video (not a video I made) here.

If she's really the forgiving type, maybe she'd settle for your placing over the dent a little magnet or sticker that says, "I love my wife"? *GRIN!*

We're happy to help and we appreciate your thoughtful rating of our answer.

I would consult the owner's manual or installation manual on this. It will show you how to do either way.

If you don't have yours, you can download it here:
http://www.maytag.com/support/manuals_literature.jsp

We're happy to help and we appreciate your thoughtful rating of our answer.