The date and time are wrong and I don't know how to re-set it

In my experience the letters rise counter-clockwise from the 4 o'clock position.
so, A would be at 4. B at 2. C at 10 and d at 7. Usually the A is a mode selector and B, C and D control the hands and day/date (if you have them) try press B to control day/date and C for changing time forward and D for changing time backwards - whichever is the shortest way.
If you have a 12/24 mode, make sure you are in the right zone is matched with the time and am/pm setting.

Judy,
If you know when your last end-of-day report was run (look at top of report), you can run end-of-day reports for each day by adjusting the computer's clock.
Example: It is Friday, and your last report was run Monday at 11PM. Adjust date/time to Tuesday at 11PM and run end-of-day. Then adjust date/time to Wednesday at 11PM and run end-of-day. Don't forget to set clock correctly or sales will be entered at the wrong date/time.
[email protected]
Please return and give me a favorable rating if this helps or is of value to you.
Feel free to email me with more details if need be.

1. In Set Up you must select the language you want to use by highlighting it then PRESS OK. If you don't do this then the date/time will not set.
2. When asked to set date and time you must select YES and press OK.
3. After completing each step you must press OK.
4. In the final step you must choose your preferred day/month/year display and then press OK.
If you don't press the OK button at each step the date and time will not set.

Hi,
To change language or date/time in the future, yo should use the Setup menu,

1. Setting up your camera
   • Attaching the strap
   • Loading the AA batteries
   • Turning on the camera
   • Setting the language and date/time
   • Storing pictures on an SD or SDHC Card

just in case if you need user manual in pdf format pls visit the link
below...
KODAK EASYSHARE C195. Digital Camera.
Extended user guide.
http://support.en.kodak.com/app/answers/detail/a_id/19314/selected/true
KODAK EASYSHARE C195 Digital Camera resources.kodak.com/support/pdf/en/manuals/.../C195_xUG_GLB_en.pdf
www.kodak.com .....

Set the date and time by using the "Date" command in the Setup menu.

Hope you read this message. I just noticed your message today on this site.
I bought an Elonex 705EB for my mum and had the same problem. It's not pressing the select key that changes the time. You must correct the time then press Menu button on yes (I had to press twice in row before it worked). I don't know why it works different from the manual. I found this out through a lot of trial and error!

1. Press the CONFIG button.
2. Select Time and Date Settings.
3. Select Set Time or Set Date.
4. Turn the MENU/SELECT knob to adjust the highlighted value.
5. Press the MENU/SELECT button to select the next value.
6. To save the time or date and return to the Time and Date Settings menu, press the BACK button at any time or press the MENU/SELECT button after adjusting the minutes or year.

You lose the date/time because the camera has no power to it to keep the settings. Basically don't leave the batteries out if you want it to keep the date/time. On the other hand it will just sit and run the batteries down just sitting there off. It is a bit annoying but that's why. Most cameras store an internal charge so they can keep the date/time but it is not supposed to last very long, it was designed so you could swap out dead batteries without having to reset the time/date every time. If it is happening on simple battery changes it means something may be wrong with the camera.

Simple: from the default time screen. Push either of the right side buttons until you see settings.

From settings: Choose Watch.

From watch choose date set.

To get the complete manual visit my tips and tricks page.

I don`t know if you are speaking about a game console or a pc, but if it`s a pc then I think your problem is due to the date and time set wrongly. Go to control panel-date and time and reset it to the right time. I think even if you are talkign about a game console that accesses the net , the problem might be the same, that is the time is set incorrectly.