I need a remote code

Check these codes:
0456 [0458 0227] [0458 0236]
Where the code is listed as [### ###] the first is for the DVD and the second is for the VCR. Otherwise just the one code operates both the DVD and the VCR.

If you are using a Sylvania DV220SL8 DVD Player \ VCR combo (which this question is posted under the heading of) there is a very simple reason why you can't format DVD-RW disks. DVD Players can't do that. You need a DVD Recorder to format DVD's.

This applies to all comments under this heading as well. You can not record if the unit you're using does not have that capability. And this unit does not have it. You can record with the VHS VCR, but the DVD Player is just that... A Player. It's not a Recorder.

Try unplugging the unit for a few seconds, plug it back in and try it. It may also be dirty and need a service.

Here it is: http://www.funai-corp.com/6pdf/om/DV220SL8.pdf

Made by Funai. Try Funai codes.

One simple solution is to unplug the unit for 30 seconds then plug it back in. Worked like a charm for me.

You can download the remote codes and conditioning instructions from
http://remotes.com/remotes/documents/JVC/RM-C18G.pdf

Please rate this solutiion. Thanks.

have you considered google-ing your remote to get the codes? You didn't give one important piece of info...what brand is it? You can find it here:
http://www.xdiv.com/remotes/

go to this site, find your remote and read the instructions:
http://www.xdiv.com/remotes/

You could try cleanining it first that would be a simple solution

Go buy a video head tape or due it yourself radio shack has video head cleaner. Remove cover unplug clead small silver audio head on right side. good luck

doctor video


.