Make, Model, & Year of Clark Forklift

Error code 42 on a Clark forklift model FCG 32 indicates a problem with the fuel system. Specifically, it means that there is a problem with the fuel injection system, such as a clogged fuel filter, damaged fuel injector, or fuel pump failure. This can result in a lean or rich fuel mixture, causing the engine to run poorly or not at all. It is recommended to have a certified mechanic inspect and repair the fuel system to ensure safe operation of the forklift.

Don't worry I'm sure you will get the solution of your problem, just check the link I attached CLARK FORKLIFT NPR 17 NPR 20 SERVICE REPAIR MANUAL

Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem. Clark GCS GPS Standard Forklift Factory Service Repair Workshop Manual...

Do you hear the groan of the hydraulic system?

Hi,
I have clark forklift not starting
error: canbus error 1

sounds like the #1 rectifier is shorted or the insulator gasket is shorted through -also the 1A contactor may be welded shut -usually caused by a weak battery or running a discharged battery too long. -Troy from A-Lift Services

On the right side of the machine open the side cover. Right near the fan on the timing cover is an oil cap. That machine has a flat head continental. There is no valve cover!

It means it's time for your periodic maintenance, the reset button should be close to hour meter

I got the same problem and same model, what's going on with Clark forklift, I look for the new transmission all over internet but can't find any. if any body know what wrong please tell us what to do. thanks a lot. TMV

So if you have three cylinders then the extend ports of the cylinders(bottom) should go to the 'A side of the valve and the Rod end or retract (top) should go to the "b" side. The A or B are probably not marked. Each cylinder should go to the valve at the coresponding lever.

Hope this helps you ask again for more..WF Services