Bushnell yardage Pro won't read distances. Short

UNIT OF MEASURE OPTIONS The YARDAGE PRO TOUR can be used to measure distances in yards or meters. The unit of measure indicators are located in the upper right portion of the LCD. To select between yards and meters, look through the monocular, depress the "mode" button (left side of the unit underneath the BUSHNELL YARDAGE PRO logo) and hold it down for approximately 2 seconds. If you are changing from yards to meters, a change in unit of measure will be indicated by the illumination of the letter M for METER indicator while the YD for YARD indicator is turned off. If you are changing from meters to yards, the opposite will occur. Note: The YARDAGE PRO TOUR will return to the last setting used, each time the unit is turned on.

my bushnell pro 1m slope will not read yardage at error 12

I went to another website and read the reviews of other owners of Bushnell products, this is a common problem from Bushnell products. The fix is to buy another or try to get them to replace it, they should recall everyone of them and give refunds or new rangefinders. I found all this out for free, thank you very much!!!

If it's like the one in the picture they don't have parts anymore. If it's the small unit call 800.423.3537 and ask for Michael. He can and will fix it. Alignment is 30 bucks, Lcd is 15 bucks and all other maintenance and adjustments are 15 bucks. Now this is half the price of a new unit, just to repair this one......Think about it.

mr tech geek

Bushnell doesn't work on those anymore, but they still have the manual for them. Make sure when you hit a target you don't see a "M" next to it. This means it's reading in meters instead of yards. Hold down the "mode button" until you see "Y" (yards) if this is the case. If not, the unit will need an alignment and bushnell doesn't do them anymore. They will offer you a newer model. The Pinseeker technology is good......They have three models to choose from.

Good Luck!!!!

mtg

The CPU board has failed. Bushnell will not have parts to repair it. They will offer you one at a discount. Call them at (800) 423-3537

you have it on the meters setting not the yards setting. hold the scan button down for three seconds or longer and it will revert to the other form. a meter is nearly 10% longer than a yard.

Has laser been cleaned properly?

I also have a dead Yardage Pro Tour XL. Would you be interested in selling me yours for a few bucks for parts? Thanks. [email protected]