SPEAKER TERMINAL 20 (RR), 15 SUBWOOFER, 21 CENTER SPEAKER, AND NUMBER 16 (LR). THE ONLY TERMINALS THAT ARE WORKING IS NUMBERS 14 (RF) AND 22 (LF). THE SPEAKERS WORK IN THE WORKING TERMINALS BUT NOT WERE THE SHOULD BE WORKING. ARE WE HOOKING THEM UP RIGHT? WE HAVE TRYED ALL THE DIFFERANTS WAY TO HOOK IT UP NAD THOSE ONES ARE NOT WORKING...PLEASE HELP!!
Umm, I hooked mine up yesterday, and I my tv has dolby digital signals going out. If your tv doesn't, that will cause some (if any) to not work. Also, make sure you have your sound setting to stereo and not mono, that will also cause some of the speakers to not work correctly.
Finally, make sure you have your tv's Audio (left/right) OUT going to the main units (your dvd player's) Audio (left/right) IN.
And have your video going from the main units OUT to one of your Tv's cmp or vid IN
Thats about it really.
Justin Fox
AUDIO
Revision: May 2004 2002 Altima
AUDIO PFP:28111
System Description EKS002KQ
BASE AND MIDLINE SYSTEM
Refer to Owner's Manual for audio system operating instructions.
Power is supplied at all times
through 15A fuse [No. 31, located in the fuse and fusible link box]
to audio unit terminal 6.
With the ignition switch in the ACC or ON position, power is supplied
through 10A fuse [No. 6, located in the fuse block (J/B)]
to audio unit terminal 10.
Ground is supplied through the case of the audio unit.
Audio signals are supplied
through audio unit terminals 1, 2, 3, 4, 13, 14, 15, and 16
to terminals + and - of front door speaker LH and RH
to terminals + and - of rear door speaker LH and RH
to terminals + and - of tweeter LH and RH.
BOSE® SYSTEM
Refer to Owner's Manual for audio system operating instructions.
Power is supplied at all times
through 15A fuse [No. 31, located in the fuse and fusible link box]
to audio unit terminal 6, and
to Bose speaker amp. terminal 1.
With the ignition switch in the ACC or ON position, power is supplied
through 10A fuse [No. 6, located in the fuse block (J/B)]
to audio unit terminal 10.
Ground is supplied through the case of the audio unit.
Ground is also supplied
to speaker amp. terminal 17
through body ground B117.
Audio signals are supplied
through audio unit terminals 1, 2, 3, 4, 13, 14, 15, and 16
to speaker amp. terminals 23, 24, 25, 26, 27, 28, 29, and 30.
Audio signals are amplified by the speaker amp.
The amplified audio signals are supplied
through speaker amp. terminals 2, 3, 9, 10, 11, 12, 13, 14, 15, 16, 18, and 19
to terminals + and - of front door speaker LH and RH
to terminals + and - of rear door speaker LH and RH
to terminals + and - of tweeter LH and RH
to terminals + and - of subwoofer LH and RH.
SPEED DEPENDENT VOLUME CONTROL (MIDLINE SYSTEM AND BOSE SYSTEM)
If activated, the radio output volume will be automatically adjusted to compensate for increased driving noises
at higher driving speeds.
The radio receives a vehicle speed signal from the combination meter, and selects the output volume.
400 views
Usually answered in minutes!
i hooked up my surround system but the left and right rear wont work when im trying to watch tv. they will work when im watching a dvd. what do i do??
×