The brew unit missing switch is inside the slot at top back wall where the top of the brew unit puts an angled piece of plastic into the slot. The piece is a slope like a nose so it gently pushes the switch as you instert the brew unit. See if the brew unit reaches this slot on the wall. If it doesn't the brew unit most likely jammed up and was removed while the gears were not in home position. Now the gears are not allowing the brew unit to return fully inserted.
If you're handy you can call Miele tech support and request they walk you through steps to diagnose this. They will discover if the gear is out of home position or not. If it is not and the switch is in contact with the brew unit you may be in luck, the swith is cheap. But if the electronics no longer reads the switch signal it's 800 bucks to replace. Good luck!
I called the miele hotline support, they told me to remove the waste-unit on left hand side and then move up and down the "lose parts". Reboot the machine, pull the cord, switch it on and hold your thumbs :)
It worked for me!!!
There is actually a brew unit present switch.
that could be your problem.
either that or a bad electronic.
hope you got like 800 dollars to throw on a 3000 unit.
1,434 views
Usually answered in minutes!
×