Under your wirless tab. Make sure Enable AP is ticked. You have named your SSID, usually the same name as your workgroup network.
In windows your workgroup is called WORKGROUP.
Chanel is set from 1 to 13
Security is set to WEP
Authentication Type is set to OPEN
Encryption key password is set to a 10 hexadecimal code.
ie: abcde12345 ( choose something you will remember)
On the device you are recieving make sure you have the same password, SSID, Same chanel as router and is set to WEP. If they are not the same then the units will not connect.
This should resolve your connection. When you first connect have the two units close to each other and reset the router. Then reset your other device. If it does not connect chect the antenna is screwed in firmly but not too tight to the router.
If it still fails then change your chanel up or down on both devices. Does not matter what channel you choose just as long as they are both the same.
256 views
Usually answered in minutes!
×