If you are using the KX-T7730 phone on a Panasonic 308/824 system. From the Switcboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle press Program * # followed by the system password ( default is 1234). Now press 001 and then SP-PHONE. Enter the system speeddial location ( 00 to 99 ) or just press SP-PHONE again to go to 00. Now enter your line access number ( usually 0 or 9 ) followed by the telephone number you would like to assign for the speeddial. Now press AUTO DIAL / STORE to save your setting. To go to the next speeddial location press SP-PHONE and follow the above steps again. Press Program to exit program mode. To dial the system speeddial from any extesion lift the handset and press * followed by the speeddial location ( example 00 )
PLEASE rate / vote this answer if it was helpful.
Thank you.
288 views
Usually answered in minutes!
If it doesn't work per the user manual, you probably have a 7730 operating manual and the system or personal programming varies by system model number. Try finding the SYSTEM model number manual and post back.
You can store 10 numbers in personal numbers or at least 100 numbers in System speed dial. It depends on the system, so please post back with the model of the SYSTEM. .
×