Question about Leisure HOMEPRIDE Electric Fireplace Heater w/ Remote

1 Answer

Light comes on but dont flicker

Our light comes on in the firplace but dont flicker. Would changing the bulbs also correct that

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Most likely this is becasee motor driving the "tinsel in a stick" is not working. Take the glass off, remove the fake logs and look underneath to see if the the rod wih the tinsel is turning. If not the problem could be the motor or the speed control. If you have a voltmeter you can test the speed control output - it's 12VDC - of course it will vary depending on the speed sselection. The mot probably cause is the motor has died. You can buy a new one at Cost is $77.01> it's a bit tricky to replace - just a tight spot is all - 2 small screws and out it comes.

Posted on Oct 04, 2009


1 Suggested Answer

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I change my bathroom vent light. Before light went out. When I would turn the light on. It just came on. Now with new light, it flickers then comes on. And my hall bathroom started doing it too once I...

It sounds like you have indeed bought fluorescent bulbs. manufacturers are encouraged to replace the incandescent bulbs with more energy saving fluorescent bulbs. They are made to look like standard bulbs so you need to look at the package carefully to see the difference. The Nu Tone and other special bulbs may still be available in the old filament style for a while but you may have to look harder or ask if they are still available. The amount of flicker often reflects the quality of the bulb. It will sometimes decrease over time.

Mar 02, 2015 | Dryers

1 Answer

Why does my Ott light flicker but not come on completely?

check and replace bulb first, if not that then most likely a ballast problem, which sends a boost of the correct amount of power to ignite the bulb then lessens the flow of power it needs to stay lit.

Sep 06, 2014 | Ott Light OttLite Truecolor Table Lamp

1 Answer

2005 T&C brake light and turn signal dont work

Replace the bulb with the one from the other side and see if it works. I bet the bulb is burnt.

Apr 25, 2013 | Chrysler Town & Country Cars & Trucks

1 Answer

Dash gauges and Information center work intermittantly - All fuses are in good

is it the lights of the gauges dont light up or the gauges dont work period? if they dont light up then check the bulbs that are behind the gauge cluster and they could be burnt out i have the flickering prob with my ac hvac controls and half the lights on my gauges dont light up due to bulbs being burnt out i just havent spent the money to get some blue leds to put in there

Feb 20, 2012 | 1995 Oldsmobile Aurora

2 Answers

Motor running but no flicker effect shaft drive

If you check your owners manual it should tell you how to change bulbs etc. Are you not seeing light, or light comes on but no flicker? If you can reply with model number on your unit, perhaps we can guide you to diagnosis and repair easier.

Sep 21, 2011 | Dimplex Compact Electric Flame Stove...

1 Answer

Headlamps flicker when hitting bumps. Notice it more on right side. Lamp ground to body is good. Connector pins to lamp are good. Adjusted headlamps, changed bulb, still have problem. No flicker noticed...

yes i agree, what you have done is what i would have been telling you to check so well done for saving you and me time.first its either one of what you say but its my guiss the headlamp housing is loose after what you have all ready done i think you will find the culpuit quick,TIP,if you find the housing loose try using cable ties they work a treat without haveing to use screws ,any problems dont be afraid to come back to me,adrian,,,,,,,,

Aug 20, 2010 | 1999 Lincoln Town Car

3 Answers

In focus 70+ light flickers

I have the exact same problem, it comes and goes, but i noticed that the screen was flickering more when the projector was tilted up a bit.
I shifted the cable from s-vhs to vga and now i dont have this problem so often anymore.

I also have the common problem that it sometimes wont start up when i power it on, or it shut down after a few seconds. It seems to be a loose wire somewhere, but i just give it a punch and then it starts..

Aug 06, 2008 | InFocus LP70+ Multimedia Projector

2 Answers

Ecoquest FreshAir - UV Flickering

UV bulbs, or rather the RCI cell needs to be changed every three years in the FreshAir, or when the "Replace RCI cell" appears, whichever comes first. The UV bulb loses its intensity over this period of time.


Download PDF Manual

Feb 17, 2008 | Ecoquest Fresh Air Air Purifier

Not finding what you are looking for?
Heating & Cooling Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Leisure Heating & Cooling Experts

Paul Carew

Level 3 Expert

3455 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Sr. Pelo
Sr. Pelo

Level 2 Expert

74 Answers

Are you a Leisure Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides