At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Sony mhc-mg310av cd changer wont release cd on tray, causing the cd component to freeze up. I took the top off and removed all cds, released the tray and then reset the grabber(component which takes cd from tray to the reader), placed tray back in place. powered on system opened door placed cd on tray. The cd fed tray mechanism spins, cd plays. But then when you open the door the cd grabber takes cd out of reader and gets hung up/freezes up causing the whole cd system to stop working. It just trys to release the grabber 4 or 5 times upon start up and then stops trying.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are a few possible reasons why your Sony 60 disc stereo model MHC-GS100 won't rotate CDs and just continuously makes a grinding or motor turning noise but the tray doesn't move. Here are some of the most common causes:
The CD drive belt is worn out or damaged. The CD drive belt is responsible for moving the CD tray and the CD itself. If the belt is worn out or damaged, it may not be able to move the tray or the CD.
The CD drive motor is faulty. The CD drive motor is responsible for rotating the CD. If the motor is faulty, it may not be able to rotate the CD.
The CD drive gears are worn out or damaged. The CD drive gears are responsible for moving the CD tray and the CD itself. If the gears are worn out or damaged, they may not be able to move the tray or the CD.
The CD drive control board is faulty. The CD drive control board is responsible for sending signals to the CD drive motor and gears. If the control board is faulty, it may not be able to send the correct signals to the motor and gears.
If you have checked all of these possible causes and you are still having problems with the CD drive, you should contact Sony customer support for help.
Here are some tips to help prevent this problem from happening in the future:
Do not overload the CD drive. Overloading the CD drive can put unnecessary strain on the drive and can lead to premature wear and tear.
Do not use damaged CDs. Using damaged CDs can damage the CD drive.
Clean the CD drive regularly. Cleaning the CD drive can help to remove dust and dirt that can build up and cause problems.
yes , remove the top cover , this will expose the entire mechanism , you may have to feel around a bit ,but theres definitly a metal lever or tab of some sort to eject the mag manually , probably on the rear of te open unit
My sony stereo rx66 after finish to play the first cd stand of going to play the second one, it put the cds one of the top of the other or under the tray. Can somebody help me?
my problem is with the alpine system. it only ejects when cold. if tried when hot it jams and wont play cds or release until cold again. i removed the panel above the radio and place an icepac on the radio and after a while it starts spitting out cds
i have a infiniti i-35 2002 and my cd player won't play or eject i was switching cd's on no. 4 and when it went in it got stuck inside it won't play no. 1thru6 are there any suggestions
×