I had purchased this watch from WalMart quite a few years ago. My other watch began breaking out my wrist -- allergies. So I found my rubber sport watch described above to wear instead, but I did not find the manual that came with the watch. The time is easy to adjust, and I can use to stop-watch capability. The problem I have is in changing the date. The day of the week is correct, but the date is off by one day. Today is Thursday, 12/20/07 and the watch indicates Thursday, 12/19. I have tried everything short of taking out the battery and reinstalling the same. There is a number stamped on the back of the watch -- 83051. Can you help?
To change the date hit the lower left button three times,then the lower right button three times and the day will be flashing change the day by using the upper right button. to change the month hit the lower right butten once and change with the upper right hand button. Hitting the lower right hand butten will cause the day to flash and this can be changed by the upper right hand button. To get out of this at anytime just hit the lower left hand button.
Changing the time back to 12 hour is the same as changing the time in general. You have to go through the entire 24 hours and back around to get it back to am/pm rather than military time. For example, if you are just pressing the button to progress the hours, it will run 12 to 12 and then the next time through go from 12 to 24, then back to 12 to 12.
Quickly press the bottom-left button twice.
then, press the bottom-right button once, and then the top-right button once. this should add 1 to the day. keep pressing the top-right button until u get the right day, the press the top-right button again.
now, how do u change the time format back to twelve hr. ?
1,395 views
Usually answered in minutes!
I have an Aquatech sport chronograph, and the number on the back is AQT83412W with another number, CR2016. I got this watch from someone else, and there is no manual. Along came leap year, and now the date is off by one day. HELP! I have tried all 3 buttons, using various combinations, and wait times, and I can't get the date to do anything but show the date. How do I change it?
Diana
×