Canon Rebel XT / EOS 350D Digital Camera Logo
Posted on Oct 02, 2009

CANON eos 450D error 05

The flash pops up, the lock clicks to more times and I get error 05 time after time. It feels as if the camera doesn't realise that the flash is up

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Jul 19, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Jul 19, 2010
Answers
1
Questions
0
Helped
2400
Points
8

I have had the same problem with my 450D. I have been living without flash on my cam for a month. Until I realized that maybe something liquid and sticky by chance got where the flash is...so i just trid to hold uo the flash my insrting my nail into the small space between the flash and the camera and tried to press the flash button. IT WORKED!!!

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Sep 05, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Sep 05, 2010
Answers
1
Questions
0
Helped
2400
Points
2

I have a canon eos 450D when i attach a sigma 70-300mm dl lens i get error 1, communication between camera and lens failed check contacts, however when i switch the camera off and on again and check the memory card the picture has taken and is stored on the memory card. also i have checked the contacts and they are clean

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Canon EOS Rebel XT Error 05 or BUSY

The Error 05 means the build in flash cannot be raised.
In the moment it should pop up, something was blocking the free movement. Could be caused by the way you were holding the camera. Could be happening, while you were pressing the flash button, or when you are in the basic zone shooting mode, such as portrait, which needs the use of the flash.
Switch the camera off an then on again. Move an eventually cause of the blocking and press the shutter realise button again.
0helpful
1answer

Error 05 flash doesn't pop up

spray a very very small amount of WD40 on the hings of pop up flash (use the thin RED spray tube)
1helpful
3answers

Error 05 on canon eos 550 d

tryed everyones sugestions for erros 05.3 clicks but non worked until i took the flash cover of by takeing 2 screws out very easy and then loosenedthe screw with the spring until flash moved freely
1helpful
1answer

When taking a picture is clicks a couple of times does not take a picture and says error 05

Check if something is blocking the in-built flash to pop up or if it is stuck. If the flash is stuck press the flash pop-up button and try pulling it up simultaneously.
0helpful
1answer

I am getting this message on my EOS 450d, (camera's built in flash pop up was obstructed turn the power switch to off and on again). I have done this several times the flash wont pop up - can you please...

Sometimes the pop-up flash on the EOS range of cameras can get stuck. The EOS family have a very tiny micro switch under one blade of the flash hot-shoe.

Get a toothpick and manually pop the switch. It should clear your error, too.

Good Luck.
2helpful
1answer

Canon EOS 350D flashes error 05 and flash won't pop up

I had the same problem but found that manually popping the flash up about 10 or 12 times restored the auto pop-up function.

Hope that this helps
0helpful
1answer

Canon 450D - Error 99 only when flash pops up

Flash Tube is bad inside the Flah head, tccamerarepair.com
1helpful
1answer

The built-in flash on my Canon EOS 450D camera won't pop-up

Had the same issue and just tried this....and it worls [PS dont use the littel plastic hotshoe cover as this keeps the microswitch depressed]


Originally Posted by Tdragone viewpost.gif
If you manually 'help' the flash to open and it doesn't pop; the microswitch under the rails of your hotshoe is probably stuck in the down position as mine was. I used a toothpick top pop it up and it works now!
0helpful
1answer

Occasionally I get 'ERROR 5' appear on the display on my EOS 450D - it is suggested that the pop-up flash is being impeded, but I know that it isn't. What is happening?

This is a common canon mechanical error.

Most of there SLRS do this the release inside the pop up flash hangs either due to weak spring or release catch itself. If it hangs for even a split second you get error code.

Try This.
  1. Clean Flash Release & Apply wd-40 with a q-tip to moving parts. DO NOT SPRAY INTO CAMERA. Use oil lightly.
  2. Or Assist flash when it tries to p up by lifting on flash gently. Maybe one day canon will fix this problem.
PS this happens to even Brand new Canons.
Not finding what you are looking for?

2,410 views

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2426 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...