Sony CCD TRV608 I may need the flex wire replaced on the LCD. Where can I get this? Thanks! Peter

It could be dirty heads, try cleaning cassette. Sony CCD TRV608

Hello, well you will find if you use Windows Vista/Win 7 no drivers for Sony cameras are loaded, none as far as I am aware are made.
But if you use Firewire cable as I do you wont need drivers, BUT make sure your camera is connected to PC via Fire Wire before you turn PC on, as it wont work if you get this wrong.
Bye
David

Hi, kindly get the best driver for your convenience here :www.sony.co.id/section/downloads
www.givemefile.net > ... > Digital camera > SONY
www.ps2netdrivers.net/driver/sony.dcr-trv480e/

esupport.sony.com/US/perl/swu-list.pl?mdl=DCRTRV22

www.userdrivers.com > Camcorder > Sony

Had the same problem. It's ainternal flex wire connecting LCD with camcorder. Got from the repair shop did it by miself and it's like knew. It's a common problem as this cable is bend each time when we open the LCD screen, so the cable become faulty.Good luck
Meggita

CCD-TRV608 is analog camcorder and it does not have any USB port to plug that cable.

on the sony website it says the driver is already in vista and xp
http://esupport.sony.com/US/perl/swu-list.pl?mdl=CCDTRV608&SelectOS=29

I replied you, please check it here.

Below is an exploded view of camcorder mechanism and Pinch Roller is marked with red line. Hope this will help you to install it again.

I dont know

This is the only solution that I have found that really works. The only problem is you need access to a computer running XP. On the Sony website they have drivers for XP. The XP drivers work for Vista, but vista will not let you install them normally. So on an XP computer goto the sony website and download the xp drivers and install them on the xp computer. Then all you need to do is go into your C: drive and there will be a folder called "Drivers" in that folder you will see the sony usb folder. Just copy it, onto a disc or thumb drive. then copy the folder to your vista computer. You can put it anywhere, I jsut put it on the desktop for easy access. Then plug in your usb cable for the camcorder, let it try to install, then it will give you an option to sellect the files yourself, browse to the folder you coppied onto your desktop and Viola, Vista will find the drivers and install them. you now can use the usb connection on your camcorder.

if you are having a hard time finding the files, email me and I will send them to you.

[email protected]