Programming is done on 7310, 7324 and 7316 type sets.Enter by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter eHow do we remove an extension from a hunt group in - 2.gifion number you want to change the pool on.
Press the next key 6 times (bottom right arrow) .
The display should say System Prgrming.
Press the show key (top right arrow)
The display should say Hunt groups
Press the show key (top right arrow)
The display should say Show Group:
Enter in the group number of the member that you wish to delete.
Press the show key (top right arrow)
The display should say Member DNs:
Press the show key (top right arrow)
The display should show members for that group.
Scroll to the member you wish to delete.
Press the Remove soft key.
Press the heading key(top Left arrow) till the display says Show Group: again.
Enter in the group number you wish to to change the deleted member to
Press the show key (top right arrow)
The display should list the current members of that list
press the Add soft key.
enter in the DN of the member you wish to add
Select Appr & Ring setting for the hunt group member
Press the release key when finished
2,879 views
Usually answered in minutes!
×