Canon phonefax cfx-l4000

Hi function + memory reference (04) + set + star (astrix /*) keep repeating till display reads memory clear.

Download the manual from here:
CANON CFX-LX4000 Plain Paper Facsimile User's Guide (this is a temporary link)
The manual was posted to and should be available from FixYa soon

You can download the User Manual from here (temporary link): http://dl.dropbox.com/u/1322442/CANON CFX-L4000.pdf

Press the dataregistration button,press set.Scroll until you find tx settings,press set.Scroll with the arrows untill you find (erase failed tx)
Press set and change it to on.All the memory of the failed tx reports will be cleared and the memory will be 100 percent available.

Press funtion and thaen data Registration,press set,use the arrows to go to tx settings,press set,go with the aroows to erase failed tx,press set,make sure it is set to on with the arrows and press set and then stop!The m/c keeps all of the faxes that has not gone thru in its memory and that builds up!Good Luck!

Try going to www.Canonusa.com and see if the manual is available there

Press Function,Dataregistration if user settings is displayed on the screen ,press # button.1 sssw will be displayed on the screen.Use the arrows to scroll down to "printer" press set or ok and scroll down till you get print count press ok or set.

All the numbers saved in group dail,are separatly saved in the one touch speed dails,you have to locate that fax number in one touch dails and change it there.

##322 is the fuser unit under the cart that needs to be replaced!Good Luck!

I would like to programme numbers on the fax machine. Even better, anywhere I can get a manual?

Thanks