Msr206, i get errors messages when i try to read/write a card

You cannot. See page 3 of the manual.

Can i have your OS? To try a fix.

i want a msr206 machineMSR 206-33 (msr206-33) Magnetic Card reder tank youu 0040741606149 cal mee

1. Install software 2. Install driver if required (usb) 3. Reset computer 4. connect msr206 to computer 5. open software for msr206 6. choose the hico or loco setting 7. input the data 8. press writer / read 9. swipe the magnetic card

Hello,

Please visit the link below for the available downloads for your card reader model.

http://www.diij.com/downloads/info_8.html

Here is the USB driver for the MSR 206:

http://www.box.net/shared/znhym9dxrr

Please reply if the specific driver is not working for your system so that I can locate one for you.

Lyzmorato
Fixya Premium Expert

Have you tried formatting the card - either in the camera, or on a computer?

http://www.diij.com/downloads/info_8.html
u can downlaod from here.

Can yoou try through control panel add new hardware
and install it that way
or run softwrae again

Your File Format error could be because you are using Letters on Track 2.
NO letters on track 2. Also try removing any spaces, ? # :.

Here is an example of a two track Card. Spaces are seen as__.


B1111112223333333^PUBLIC/JOHN___^9912120100000000000000000000
1111112223333333=9912120100000000

Try connecting using the different COM port settings (mine was COM 4). The setting can be changed within the software.