I HAVE A D LINK ADSL MODEM MODEL 502 T. AND ALSO HAVE A BRAOAD BAND INTERNET CONNECTION OF BSNL BUT IT IS NOT WORKING PLEASE ASSIST ME WITH CONFIGURING STEPS

TP-Link Router not working, want to setup TP-Link router, have troubleshooting issues. No need to worry we are here to provide you the best solution according to your requirements of router issue. You just need to dial TP-Link Router Helpline Number avail at toll-free number 1-833-284-3444. Our tech support team includes executives who are professional and know each & every solution which may arise at the time of accessing.
The wireless network is unstable via my wireless router/modem router
Some time router is not still connected and working that time users do follow given instruction and make the trouble-free router.
Locate wireless clients in a reasonable distance.
Get away from obstacles.
Reduce the number of wireless clients.
Decline interference from other wireless equipment.
Optimize the router's position.
Change some settings on the router.
Test the WIFI device.

Get technical service for your problem which is not understanding how to solve the technical issue, our technical expertise is available for 24*7 and they are ready for pick up the call when called by the customer. If wants to more technical service visit our TP-Link Router Service websites.

https://servicenumber.org/tp-link-router-customer-service.html

Sorry i tried to open 192.168.0.50 and it could not display. what is the new IP

it is not your modem it is definetly BSNL. but if you can afford then try either switching to other adsl service or changing your modem.

this is not a problem with ur PC or router this could be in the Filter or splitter that ur ISP gave you, what i would do is call ur ISP and have them run a line test that could be the reason
i work for att. and that does happen ALOT you can also go to
www.speakeasy.net go to the bottom you should see whats my speed or test ur speed click on that and select a server closest to you and it will run a speed test up and download speed


good luck ,
July

just change the ip address in the router and give the proper settings in the router

use network swich just plug in both computers and the incoming internet

siemens c 2110 modem 3 lights flasing continously what to do

You dont need any driver to connect with adsl modem. BSNL is normally configured by BSNL so dont reset the modem unless you know how to configure it. You need driver only if you are connecting to computer with USB. For ethernet, there is no need of driver software.

take care

Following is a link where you can get USB modem driver installation guide and driver.......but please make sure that you do not try to install this on SERVICE PACK 3.......because that will not install on service packs.........in case you have service packs for XP installed first uninstall ther service pack........then install the USB modem which is more or less smooth........and you can reinstall service packs afterwards without any conflict later on after the installation is complete.........this is the way I was able to install this modem driver on my PC.......

http://www.calcuttatelephones.com/dataoneinstall/usb09.html