I have a snapped cable on a delta orion multigym. Is it possible to buy a replacement cable for the lat pull-down bar?

Question moved from Cars and Trucks.

This is a virtually unknown make. There is one video that might help.

https://www.google.com/search?q=Delta+Orion+home+gym+assembly+manual

Sometimes the parts suppliers have diagrams of all the pulleys and cables. There are others, but not yours.

https://www.google.com/search?q=delta+orion+home+gym+parts+diagram

..

try going to a good hardware stop and buying a length of stainless steel cable and a couple of cable clamps and cable inserts ( eye rings )
take a measurement of the length of cable needed and allow for the extra for the looping and clamping
measure the diameter and that will be as good as the bought one

Try Multisports in Houston, Texas

or

All Bodycraft @1-800-990-5556 or go to www.bodycraft.com

Try contacting Wire Rope House, Eagle Road, North Moons Moat, Redwich, B98 9HF.
Give dimensions of existing wire rope and fittings - they make replacement cables to order. Good Luck.

hi there i have a instuctions book for a delta orion multigym with a pic of pully and cables if you still looking drop me a line at [email protected] and i'll email you a copy of the layout
matt

Hi,

I would suggest that you buy a replacement handle bar, which you should be able to fit yourself. Contact www.quinny.com for information.

Hope this helps.

adjust the cables to were they are as loose as possible. one cable should be for snap back and the other for the actual throttle. you will have to put the housing on the bars and the throttle sleeve on the bars, then install the cables in the throttle sleeve.

i have a delta orion II multi gym with no instructions, i do not understand the pulley system can yuo help

hi i can help u i have delta orion multi gym if u email me on [email protected] will forward u pitures of pulley system .sal