Driver for Fibre Channel HBA A5158A

Lots of remarkable information here my friend!

What is Fibre Channel? - Definition from WhatIs.com

searchstorage.techtarget.com > definition > Fibre-Channel
Fibre Channel is a high-speed networking technology primarily used for transmitting data among data centers, computer servers, switches and storage at data rates of up to 128 Gbps.

Fibre Channel Industry Association

fibrechannel.org6 days ago - Storage Area Networks. Fibre Channel is at the heart of the data center connecting servers to storage, and relied upon for the most strenuous ...

4 Facts about Fibre Channel Networks You Should Know - B&H

www.bhphotovideo.com > ... > Tips and Solutions

First of all, what is a fibre channel network? Simply put, a fibre channel network is a high-speed network that connects physically to a storage network. What's the ...

look in the devicemanager what does it say.
update thrue the deviemanager or search the internet

Minimum Supported Red Hat Updates •Red Hat Enterprise Linux 5 Update 1 •Red Hat Enterprise Linux 4 Update 5 6-Core/4-Core Intel Xeon Processor 7400 Series •Red Hat Enterprise Linux 5.22 •Red Hat Enterprise Linux 4.7 Minimum Supported Novell Service Packs•SUSE LINUX Enterprise Server 10 SP1•SUSE LINUX Enterprise Server 9 SP31 6-Core/4-Core Intel Xeon Processor 7400 Series •SUSE LINUX Enterprise Server 10 SP23 •SUSE LINUX Enterprise Server 9 SP44

Yes, you will need a fiber channel host bus adapter (HBA) in the PC. Install the HBA in the PC and connect it to your fabric, and then zone it the same as you would zone a server.
If you don't have a fiber channel fabric, it might work if you connect the HBA directly to the tape drive, but you definitely will need a HBA.

why not read HPs books.
or ask on HP forum.
yah think?

like here,
see this? the REAL HP, ? its a business puter so they will direct you to that place, its not a consumer PC so... yah

https://h30434.www3.hp.com/

Don't use Gnome.

Install with KDE desktop because this new Gnome have some big problems

Dear Sir

My printer is laserjet 1320

PCL XL error
Subsystem: KERNEL
Error: Illegal Tag
Operator: 0x1b
Position: 6




Pls. This problem solution give me.

JNI is bought by AMCC.
You can go to the AMCC driver section and download it:

http://www.amcc.com/drivers/notice.html

Are you over thinking this? Have you checked the source and target media's file systems for 1: errors and 2: suitability of file system format? Have you confirmed the integrity of the source files? Questions like this can seem simplistic but when diagnosing any problem always start at the beginning. You are using an distro installer that is suitable for an IBM p655's architecture.

Hi there, You apparently don't have downloaded all drivers and software needed. I'd go to: http://www.sun.com/products-n-solutions/ hardware/docs/Network_Storage_Solutions/Adapters/index.html. Install the software in the following sequence: 1. Download and install Sun StorEdge SAN Foundation software 4.2 packages and patches. See Sun StorEdge SAN Foundation Software 4.2 Installation Guide, 817-1244. 2. Download and install the appropriate JNI 2 Gb PCI Single and Dual Port HBAs packages and patches. See JNI 2 Gb PCI Single and Dual Port Fibre Channel Host Bus Adapters Release Notes, 817-2260. Good luck!