The magnavox t.v. i'm trying to program doesnt respond to any of the jr300 codes, How do i do an all search

RC Programming Your Jensen JR300 Remote Control

If your Magnavox Remote is a universal remote control, you should look up the code for Magavox DVD player in the user's manual. It also should indicate the procedure to program your remote and the prcedure if your device won't respond to any code..
Don't have a manual?
Do a google search fer
Manual Magnavox remote Mode
Now, if your Magnavox remot is NOT a universal control and it won't work for your DVD, theres is no way to reprogram it.

See some Magnavox code lists here

http://www.remotecodelist.com/

RCA Universal Remote Control Programming Codes Programming Your Universal Remote.

The remote may already be set up to operate your brand of TV, VCR, or Cable Box. It is pre-programmed with following codes:

• TV-000
• VCR-000
• Cable Box-000
• AUX is programmed with VCR code 037

For brands that require programming, there are two ways to program: Using Code Lists or Code Search. Use Code Search if the code lists are not available or if the codes from the lists do not operate a device.

Programming a Device using Code Search:

1. Manually turn ON your device (TV, VCR, Cable Box)
2. Press and "HOLD" CODE SEARCH
3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
4. Release CODE SEARCH.
5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
6. Once the device turns off, press and release ENTER.
7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Programming a device using the Code Lists:

1. Find codes for each device and brand below.
2. Press and "HOLD" CODE SEARCH.
3. Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
4. Enter the three digit code from the TV, VCR or Cable Box code lists.
   
   
5. Release CODE SEARCH.
6. With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists.

Magnavox TV Codes: 006, 007, 010, 013, 016

Hello
Codes for Panasonic TV with Magnavox universal remote control are:
0029,0052,0064
Direct Code Entry method

1* Press and hold the CODE SEARCH button until the

red indicator stays on, then release the CODE

SEARCH button.

2* Press and release the desired mode button (TV,

VCR, etc.). The red indicator blinks, then stays lit.

3* Enter the 4 digit code from the code tables (on

separate sheet). Note: after a valid code entry, the

red indicator turns off. For an invalid code, the red

indicator flashes.

4* With your device on, press CHANNEL UP. If the

device responds, no further programming is required.

Note: If some buttons do not operate your equipment,
try one of the other codes for your brand
OK.

Codes for Magnavox televisions:
Magnavox 0054, 1254, 0030, 0179, 0187

Link to the programming instructions and more codes:
http://www.remotecentral.com/features/r-jr300.htm

Magnavox TV codes:
Magnavox 0054, 1254, 0030, 0179, 0187

Link to more codes and program instructions:
http://www.remotecentral.com/features/r-jr300.htm

Link to codes for Jensen JR300 remote:
http://www.remotecentral.com/features/r-jr300.htm

Codes for Magnavox:
Magnavox 0054, 1254, 0030, 0179, 0187

try this:
http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=other&db=devices&br=jensen&dv=universalremote&md=jr300cjr400cjr500c&fc=&kw=&st=&dt=&so=&pg=1&file=others/jensen/jr300-400-500-manual.zip

here is the 3 digit codes ive found to try 586, 651, 720, 666, 731, 800

MAGNAVOX ............ 0062 0004 0009 for digit codes
........................... 0456 0183 0226 0288
........................... 0008 0068 0075 0141

Manually turn on the device (TV, VCR, DVD, etc.) you wish to
program.

2. Press and hold the CODE SEARCH/SETUP button on the remote
until the INDICATOR LIGHT lights, then release.

3. Press and release the button for the device you are programming
(TV, VCR, DVD, etc.). For AUX, press AUX then the device button
you are assigning to AUX. The INDICATOR LIGHT will blink then
remain lit.

4. Enter the three or four digit code for your device using the number
buttons in the GE Universal Remote. After your code is entered the
INDICATOR LIGHT will turn off.

5. Aim the remote at the device (TV, VCR, DVD, etc.) and press the
POWER button. Your device should turn off.

Note: If your device does not respond to the first code listed,
repeat steps with the next code. If none of the codes listed for your
device work for your device or your brand is not listed,
try the Code Search method described below.

USING CODE SEARCH FUNCTION
If your TV, VCR, DVD, etc. does not respond after you have tried all the codes
for your brand or if your brand is not listed, try searching for your codes by
following the steps below.

1. Turn on the device you wish to program.

2. Press and hold CODE SEARCH/SETUP until the INDICATOR
LIGHT lights, then release.

3. Press and release the device button for the device you are
programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will
blink once then remain lit. For AUX, press AUX then the device

A magnavox remote should program like the phillips universal. I will post the link. If this doesnt help post the model number of the magnavox remote that you are trying to program. the model number is usually in the battery compartment.
http://www.universal-remote.net/philipsmagnavox.html