My camera is saying write ok! and wont take pictures

Hi,

Do the following procedure to fix this problem.Save all pictures to your computer turn camera on, press the menu/ok button, select Setup, press ok. Select frame number and change frame No. to renew, press ok.

• Leave Setup.

• Press the menu/ok button, select Setup, press ok again.

• Select Format, press ok / ok until the card is formatted.

• Now the counter should start over with 100.0001 again.

• Set frame no. back to Cont. to avoid to many images with the same filename.

Thank you !!

In order to solve the problem you need to transfer pictures from the internal memory to the SD card and thereafter you will be able to delete the pics in the internal memory.
How do I transfer pictures from the internal memory of my KODAK Digital Camera to a memory card? Answer :
Follow these steps:

1. On the camera, press Review and then Menu.
2. Select Image Storage.
3. Change to Internal Memory.
4. In the menu listing, scroll down to Copy, and select OK.
5. Select a single picture, or select All.
6. When you have finished copying pictures, reset the Image Storage location to your original setting.

Go to camera Menu and select Initialize, OK.
Camera will turn on itself, if problem still exist, tap camera gently and turn On again to solve lens access problem.
Memory stick error can be solved by formatting it through Format menu in camera. Use another memory stick in camera to make sure that camera is OK.

you need to install a driver

hi try to reset ur camera...To do such reset, turn on the camera and hold the menu button down for longer than 5 seconds. A message should hopefully come up on your LCD asking if you want to reset the camera. Select Yes...
thank u!!!
rate me!!

Remove the camera batteries Put the card back in the photo printer and take all your pics off ,then reformat it and put it back in the camera with the Batteries .

If your pic is in the locked mode (Green Key Icon). Bring up picture. Press menu. Press (Playback Menu) and hit OK. Press OK again and it should bring up the pic with option of off or on. Hit off to unlock and you should be able to delete the pic.

press menu
go to setup
scroll down to the second option: memory stick tool
go to format
re-set the format to "ok" even if it says "ok" already
press ok to all dad in memory stick will be erased, ready?

and all the pics will be deleted. thats the problem with this camera, everything is good except trying to figure out how to delete them all!!! ughh

There seems to be a corruption of file type between camera and computer The fact that the computer wont play mov. but the camera will if back loaded seems odd. JPEG files can and do go wonky if back loaded to camera after editing because essential info for the camera has been deleted. A JPEG file as produced by a camera is properly called an EXIF file because has has EXtendedINformation. Lose it and the camera wont know it. Like wise older PC's such Win 98 and older software don't know about EXIF so they chop it off So something like that is happening here. Check out Tech Support at Kodak see what they can tell you.