EM227 ASKS FOR PASS CODE ..I DONT HAVE WHY?

Hi Richard

Try putting in 0000 this is normally a default pass code for most Bluetooth items hope this helps

while the phone is tring to locate the ear peice, press and hold the button on the ear piece till it blinks the flip it open and see if the phone finds it.

There are several kinds of Bluetooth Profiles. If you're only looking to send and receive phone phone calls, A Bluetooth headset only needs a Hands Free Profile or HFP.

The EM227 cannot be used as a stereo headset because a different Bluetooth Profile is required. If this is what you're intending to use it for, You may want to invest in Bluetooth enable Studio Headphones.

Try these steps to Troubleshoot the issue:

1. Make sure that your EM227 has been fully charged. the User Guide suggests that you charge the Headset for at least 5 hours before you use it for the 1st time.

2. Go to your device's Bluetooth Settings and scan for nearby devices.

3. Turn ON your EM227 Bluetooth Headset and place it in pairing mode. The Bluetooth indicator light will flash RED and BLUE.

Don't Forget to keep your Bluetooth Headset and your device within 3 feet of each other.

4. If your device asks for a Pass Code, try entering "0000" ( Four Zeroes)

Once you've paired the device, the LED indicator should now blink as a steady Blue light. Try making a test call.

Remember, The EM227 was only designed for Hands free calling ONLY.

Hi,
This means that you unit is not charged fully. It happens all the time when the unit finds the phone but wont connect, however after 8 hours of charge you should be able to connect.
CS

Hi,this is a detailed step on how to connect your htc to your notebook via bluetooth. STEP 1. Turn on the bluetooth of your htc which is accesed at the connnectivity settings of your phone.
STEP 2 Ensure you also put on the bluetooth on your notebook,most notebooks have a single button in front of the keyboard,to turn on the bluetooth. STEP 3 You now go to the bluetooth settings on your phone,and click on 'add device'.when you click on it,it requests for a pass code,when this is done for the first time,this pass code can be any 4 digits of your choice. STEP4 After entering the pass code on the phone,a pop up shows on your notebook requesting for the same pass code you entered on your phone. Ensure you enter the same pass code for both the phone and notebook,if not the devices won't pair via bluetooth.
STEP 5. After entering the pass code on the notebook,the notebook is automatically paired with the phone via bluetooth,afterwards you can be able to transfer files between the phone and the notebook via bluetooth.
Thanks and take care

I have lost the manual so i cant add my bluetooth to my phone with the pass key

Try 0000, it worked for mine.

0000

its normally 4 Zero's 0000

ok it took me a while the way u need to do this pairing is easy they just explain it really bad.
in your phone find the add device
press the call button till the purple light comes on
open the FLIP(microphone part AND THE EAR PEICE!!! people for get the ear peice)
press ok and have your phone start searching
once it finds the device press 0000 for the pin
your all set i almost sure this will work!!!