The shaft I bought my extractor juicer in Montreal (Quebec, Canada) almost 20 years ago. I am satisfied but only one thing: Why the shaft is not in Stainless steel? It is always rusted even if I put oil on it. [email protected]

I have one that is new and I am selling it for $50.00. I do not have the instructions or manual. If interested call (951) 313-7828. It does work.

this has happened to me, but i didn't have all the parts on correctly. if the 'case' is not put back on properly and the little nib flush it will not start. it should look exactly like your picture. sounds odd that there would be a problem. i have 3 of them LOVE THEM, (and i have other juicers as well) that we use as a family. I would NOT trade any of them I love them that much. In fact the one my parents bought 33 years ago I still have and it still works ;-) Don't give up, it's an excellent juicer!

Hello !

The stainless steel shaft might have misaligned from the motor bushing due to the fall.
But, It would be risky if you tried to open the motor assembly and realign it by yourself, a service man is usually the experts on this.

You can try first to lubricate the shafting with an oil and try to rotate it and see if it moves freely.

You can also inspect if the seal from the shafting is not broken. better replace it if you found one.

The bearing also is most like to be damaged and will need to be replaced.

This link might be helpful if you want to order parts from internet
http://ecommerce.hacres.com/Champion-Juicer-Body-Hub-Oil-and-Seal-White

I've had one for 21 years and when I replaced the blade the same thing happened.
The blade is not supposed to be held firmly in place so it can slip intentionally to
minimize vibration. If you bought the juicer new, think back, and I believe you will
remember the vibration problem. I seems with a worn blade they vibrate less. The
motor is very durable and uses roller bearings like on a skate board. I went back
to the old blade, which I sharpen with a drill using a small bit.

found a user guide download

4 SCREWS HOLD THE BASE PLATE.
REMOVE IT AND HAVE A LOOK. THE
WIRING IS PRETTY SIMPLE. THIS THING
IS REALLY BUILT, SO IT MIGHT BE SIMPLE
LIKE YOU SAID. MINE IS 19 YEARS OLD
AND I HAVE PARTS FOR ANOTHER 19.

Hi!

You can download the manual from the link---

Oscar juice extractor

This is the only one available. Please rate this solution as fixya if found useful.

Thanks
Rylee

Hi my name is patricia you probably have to have the handle bars on or up so it can be tight and then the motor will run.

I HAVE LOST THE BOOK AND PAPERWORK TO MY RIVAL JUICE EXTRACTOR MODEL 965. IS IT POSSIBLE TO GET ANOTHER BOOK AND PAPERWORK FOR IT?

Are both of the metal parts that you twist the top onto still sturdy? One of mine is broken, and I have to find a replacement part.