Konica minolta bizhub 250 I need to scan many documents to computer says user id and password incorrect

Konica Minolta bizhub 200 User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

this means the computer name and or passwordare incorrect when creating the one touch key in the user name and password fields the user name and password must match exactly to the name and password on the pc

Please check the sensors and actuators ,open & close front door to reset nisfeed.Clarification Top feed = Automatic Document Feeder?If YES,please verify misfeed paper beetween coverplaten and feedbelt(Yellow).Is necessary disassembly the ADF.Good luck.You will find a little paper.

You are getting a failure sheet. This happens when the scan doesnt go through. I think you are reffering to SMB scanning, which needs to have the following setup on both the MFP and the copier.

Host ID or NAME - IP address or hostname with DNS resolution.

Share Name - This is your SMB share name or folder share name on the remote PC

User Name - This is an account that is configured on the remote PC

Password - This is the password for the account setup on the remote PC.

Some things to keep in mind: Third party firewalls can block the bizhub from writing files.

Set share permissions to full control. (under sharing tab> permissions buttion)

Set NTFS permissions to at least write access. (if you have a "security" tab on the shared folder.

Or, you may see something like "allow network users to change my files" on the sharing tab. This basically does the same under different configuration scenario.

One last thing. If you havent changed anything since the problem started, it is probably just something like an expired password on the account that is setup for the copier.

Good Luck.

If you login as administrator via the browser you can edit the scan button settings, (administrator code 12345678)

It sounds like you have setup a fax forward box.

You need to set up a one touch, scan to SMB.

this can be easily done via your web browser by typing in the IP address of the MFP and set it from there.

You need the IP address of the laptop and is best to put the shared folder in the main drive (C).
Then for the file path you just need to enter the name of the shared folder EXACTLY as it is on the lap top.
You also MUST enter the ID a password to give it access.

You need to create a "one-touch"
This can be done in the Admin Screen without having to enter a code.
Better yet is to just yype the IP address into your browser and create them there.
The copier will need an email address in order to send them and you may need to log out and then back into the 250 as an "Admin".

yes, you can, go to brauser and type your bizhub ip aadress, you'll get a webscope page, there log in as administrator and under network choose e-mailt - smtp and there shold be a place where you can mark, that youre smtp server requires authentication.

You need to use the Scan to SMB function.
First create a folder, share it over your network.

Go to the MFP and under the scan to SMB enter the IP and path to the folder, enter the ID and password for the computer.

This will scan to the shared folder.

Use the "Separate Scan" button on the panel. By pushing this you are telling the scanner that you have separate scans to scan as one document. Once all files are scanned, push the separate scan button again to indicate you are finished scanning.