Lyra Jet 2202 doesn't display text in menus

I think you will need to upgrade the firmware of your player. Go to this page:
http://www.rcaaudiovideo.com/search/?sku=RD2762
Then select the "Downloads" then click on "Firmware Updates/Restore Utility". Downloading file RD2762_FWUpgrade_v3.60a.exe will be begun.
Run this patch and good luck.
gylacz

Hello,
try to enter service mode by pressing 08+power on
enter code 1501 you will see 2 sighns "+" on display
by using plastic stick you can calibrate your display
just touch this "+" jently
then wait few seconds till calibrating process
...
Good luck!!!

Go to the website and check for most recent firmware. go to support icon and press the update firmware button and then follow the guided instructions!!
YOUR WELCOME

try brand new cables. I think a spike would possibly do this, doubtful though since the projector itself is not fried. also try reflashing the unit with the newest firmware.

If your 6360 has a blank display, garbled characters, inverted, upside down, or backwards display the control panel is bad and must be replaced.
Here's a video to replace it. It's very easy and takes about a minute.

">

Go to http//www.hp.com

did u try holding down the power button for 10 sec? now if u could help me ive been trying 2 delete songs but i have kbnow idea how could uhelp me ? emaail [email protected]

1. Reprofile the MP3 player.

2. If does not work the above, get the firmware update file in the web and update your mp3 player.

Best regards,

this is the best solution you have update your lyra rd 1080/rd 1090 for download the updating click her http://download.rca.com/download/RD1080_90FWUpgrade_v4.26.exe and after instaling this update follwo instructions provided below ? To update your Lyra RD1080/RD1090, make sure you have it connected to the computer via the included USB cable. You will need to make sure that no external memory has been inserted and the Lyra RD1080/RD1090 display reads: "USB Connected Int. Mem". (If it does not, please refer to the users guide for the section on how to switch between internal and external memory.) ? Once connected, locate and run the Lyra Systems File Update Utility if it didn't open automatically. Installshield Wizard will have automatically created this icon on your desktop as well as under "Programs", "Lyra Personal Audio Player", "RD1080/RD1090" in your START menu. ? Click the "Refresh" button until the RD1080/RD1090 player shows up under device. ? Once displayed, highlight the drive letter by clicking on it, and click the "Update SYstem Files" button. ? When successfully completed, you will see the message, "The Lyra Personal Audio Player Device system files were successfully updated." ? Click the "OK" button, and then "Done". This will close the Lyra Systems File Update Utility. ? Disconnect the Lyra RD1080/RD1090 from the USB cable, turn the unit off and back on.

Update the firmware off the RCA/Thompson site. Likely that the current firmware is damaged.