Need circuit card for Hobart Mixer Model HL600C

It is a Start Capacitor. It give the motor a jolt to get it running.

HOBART, Fits Hobart Brand, For A120/A200, Capacitor ...

Grainger https://www.grainger.com > product > HOBART-Capa...
HOBART Capacitor, Motor Start: Fits Hobart Brand, For A120/A200 ; Item: 235F28 ; Mfr. Model: 00-070487-00025 ; Catalog Page: N/A.
US$41.13

MOTOR STARTING CAPACITOR FOR HOBAR MIXER ...

eBay https://www.ebay.ca > ... > Commercial Mixers
MOTOR STARTING CAPACITOR FOR HOBAR MIXER MODEL A200 REPLACES 7048700018 ; Condition. New ; Quantity. 67 sold. 82 available ; Item Number. 254321066847 ; Brand.
Rating: 5 · ‎ 1 vote

Motor Starting Capacitor Fitting Hobart Mixers A120, A200 ...

National Band Saw Parts https://nbsparts.com > All Products
MOTOR STARTING CAPACITOR FOR HOBAR MIXER MODEL A200 REPLACES 00-070487-00018. 125V, 50/60HZ, 145-174uF. Includes: One Capacitor. Replaces#: 00-070487-00018 ...
US$30.00 · ‎ In stock
https://www.google.com/search?q=Hobart+A200+the+capacitor+is+starting+or+running+capacitor

..

Question edited to add maker
Question moved from Cars and Trucks category.

chaffing in the wiring harness, or possibly windings on the motor. There is a dead short somewhere.

Service manual and wiring diagram.

A200 MIXER TECHNICAL MANUAL (ML-104858) (115/60/3)

Parts Town https://www.partstown.com > HOB-A200_spm PDF A200 Mixer 115/60/1 Technical ManualPage 2 of 43 ... Manual Bowl Lift ... If service is needed on this equipment, contact your local Hobart Service Office.
43 pages

https://www.google.com/search?q=hobart+a200+blows+fuses

..

Check the power cable. It may have been kinked and shorted. Check if any of the internal switch or connectors are touching the body of the mixer. Some moving parts maybe stuck or dislodged due to the horizontal placement.

It is a commercial machine, so I would advise against any major repairs. The manual does give all the information. The unit has oil seals in the head and these would have to be replaced.

Service Manual

https://www.manualslib.com/manual/1064440/Hobart-H600.html?page=29

Owners Manual

https://www.alfaco.com/wp-content/uploads/2016/11/HL600-HL600C-HL662-Manual.pdf

..

I'd say you're most likely overloading the mixer. This mixer, and others similar in size, are frequently overloaded by people making pizza dough. If you are making dough, keep in mind the A-200's capacity is 9 lb. of 40% A.R. pizza dough, mixed for 5 minutes maximum. If you need to mix longer, the batch must be cut down even smaller, but I don't even know if you're mixing dough.

Try running the mixer unloaded (i.e. nothing in the bowl) for ten minutes or more and see if it gets hot. If it still gets hot, the motor's start circuit (varies depending upon age of the A-200; Hobart used numerous motors in the A-200 over the years, incorporating different starting circuits) most likely has problems. If it doesn't get hot when operating unloaded, then you're probably overheating the mixer by overloading it.

call Hobart for the correct oil any way and an elcetrican will just add more problems for yoy

Hi Dan. Two options. The first is to call Hobart and ask about a temporary replacement mixer while your original motor is being rebuilt. They'll charge you for it, if they will do it at all. If Hobart is doing the rebuilding, they might give you a better price or a free loaner.

Second. eBay often lists hobart motors for sale, you might get lucky and find one quickly. Since you absolutely must have a working mixer for your business, you might consider having a spare motor on hand for just such an occaision.

If this solution has assisted you, please rate it. Good luck! ricardok45

take top front cover off see if motor is spinning when turned on? hum can come when motor is running or transmision jammed or motor has issue like capsitor bad or start switch inside motor bad.

Hi,im a hobart tech and know all these mixers well.What kind of mixer are you looking to write about?The differences are the sizes of bowls as 20qt,30qt,40qt,60,qt,80qt,140qt.Pick a mixer and i will write YOUR paper,but i want a fixya rating in return.

Please be more specific of what part you need.Whats the problem with the mixer?Im a hobart tech and service these mixers often.