Question about GE Washing Machines

Open Question

GE model number gtw330ask0www no matter what setting I put it on heavy light delicates casual speed wash it doesn't matter when I push the start pause button the fill light comes on but then doesn't do nothing I took the panel off the back and I'm looking at the circuit board route for the fuel light is there's a on the green silicone board now z201little green light flashing what does that mean what's wrong with it how can I fix this

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: microwave wont come on at all.

replace the fuse. You have to remove the top grill and then you will find it above the display

Posted on Dec 29, 2007

Ad

Anonymous

  • 149 Answers

SOURCE: Toshiba TV model CZ27V51 - picture+audio off, red light flashing

hi there, Flashing light red means a shorted electronic component is need to be replaced. do some test at video section, most of it are diode, transistors, transformers. ty

Posted on Jan 27, 2008

David Coomer

  • 1073 Answers

SOURCE: Whirlpool Duet washer control lock

hold in the signal button for 4 seconds and it will unlock the control

Posted on May 06, 2008

Anonymous

  • 1 Answer

SOURCE: kenmore 80 series modej # 110 20842 990

Problem solved with a new washer

thanks

Posted on Dec 16, 2008

Anonymous

  • 31 Answers

SOURCE: Kenmore Elite H3 control buttons - some work some don't

The diagnostic function will not help you if your user interface board (UIB) is acting up because to put into diagnostic you have to select drain spin, then the no spin option, and hit the prewash button 4 times.

It sounds like your UIB is the problem.

Posted on Feb 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

GE GFWN1100LWW. Can the high speed spin work on the lower wash cycles?


From my experience, the lower wash cycles are set to only do certain things. For example: the Delicate won't do a high speed spin, even though a high speed spin wouldn't really be destructive to delicates, but would force more water out of them! I usually just run a "Drain/Spin" after the Delicate cycle.

Nov 27, 2015 | GE Washing Machines

1 Answer

HE3 doesn't respond to any button. Time light keeps flashing time. Pause cancel button does nothing, Cycle doesn't start. The only thing that will change is if you push a different mode ie, heavy,...


Unplug the machine for at least half an hour to eliminate the possibility of an electronic glitch. Then upon plugging in back, close the door then push CONTROL/ON (if present on this model). Select the DRAIN/SPIN cycle then select NO SPIN by pressing the SPIN SPEED button. Push PREWASH OPTION four times within five seconds. If PREWASH OPTION is not present on this model, press EXTRA RINSE four times within five seconds. C:00 will light up on the display. If the Starting procedure fails, push the PAUSE/CANCEL button then repeat the starting procedure.

In order to advance to the next step of the test procedure, push PREWASH OPTION button two times. If PREWASH OPTION is not present on this model, press EXTRA RINSE two times. The test program goes from C:00 to C:08 and should flash an error code when a problem is present. Post the code back for further troubleshooting, including the exact model number of the machine.

Sep 20, 2011 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

I have a GE Washing/dryer Stackable machine combo. The speed maintain normal speed even with the Delicate Clothes option. How to trouble shoot? There is a Siebe Control that is connected to the timer Knob...


The speed change voltages are selected by the timer contacts. Try rotating your timer clockwise rapidly through several revolutions then select a delicate spin cycle and see if the speed is still too fast. If it is then the most likely suspect is the timer itself.

http://www.appliancepartspros.com/part_details.aspx?part_id=2045983

Model number used: WSM2780WAWWW

The timers are the same.

Thanks for using FixYa.

Kelly

Mar 18, 2010 | GE WSM2780W Stacked Washer / Dryer

1 Answer

Whirlpool GGW9250PW Automatic Cycle not working


We are sorry to hear of the problem with your Whirlpool dryer. We would recommend having a local certified technician in your area properly diagnose and repair the issue you are experiencing. Please email us at Whirlpool_Reviews@Whirlpool.com with your name, phone number, address and the model and serial number for your refrigerator.

Apr 04, 2017 | Whirlpool GGW9250PL Gas Dryer

1 Answer

Whirlpool front load washer won't spin - just sometimes


Most Whirlpool (Hotpoint) machines have "out of balance" sensors that detect very large movements of the drum suspension usually due to a very badly balanced washing load.
This can occur for various reasons but putting large and/or heavy items in can trigger these sensors i,f as the machine starts to spin, the items dont get distributed evenly around the drum. This is more likley with large/heavy items.
The machine will then restrict the spin speed for the remainder of the wash cycle, and once the machine is switched off, the next time the machine is used it returns the spin speed back to normal - but if it detects an out of balance situation, it will again restrict the spin speed.
It sounds to me the machine is acting as designed. You could try positioning the items differently as you load them, and hope they dont end up "all over one side".

Oct 06, 2017 | Whirlpool CAM2752KQ Top Load Washer

1 Answer

GE 5500 washing machine TERMS


These are the agitator and spin speeds.

Mar 11, 2009 | GE WBSR3140DW Top Load Washer

1 Answer

Kenmore Elite H3 control buttons - some work some don't


The diagnostic function will not help you if your user interface board (UIB) is acting up because to put into diagnostic you have to select drain spin, then the no spin option, and hit the prewash button 4 times.

It sounds like your UIB is the problem.

Jan 01, 2009 | Kenmore 42822 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

geapptech

Level 2 Expert

157 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...