How to remove the base from a 42 auria tv - Televison & Video

Auria TV 5 Digit Remote Control Codes
11423
10017
11265
10178
10856
11178

Auria TV Codes for RCA 3 in 1 Universal Remote = 12087


ON MOST REMOTES (Generalized):
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV's 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.


No one buys Universal Remotes, they are so 1990s :>D You buy a facsimile remote which is an exact copy of the original, no programming needed and all the original functions.

https://www.google.com/search?q=32+inch+auria+tv+replacement+remote+control

Your search query is 'make model replacement remote control'.
..

0071 0101 0113 0152 0181 0236. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/

Well, the USER GUIDE 96 pages is here if it helps.
http://www.manualslib.com/download/230039/Eqd-Auria-Eq3288.html

Other than going to Thompson who is RCA/GE/Proscan you can Google the model number with base to see what is available.

I just casually looked at the TV in Menards the other day and the picture quality didn't look very good to me. To confirm my suspicions, I did a little searching. Conclusion: keep shopping

http://other-company.pissedconsumer.com/bait-and-switch-of-auria-tv-20110227224052.html

http://slickdeals.net/forums/showthread.php?t=2663641

http://www.viewpoints.com/Auria-Auria-Model-EQ5588-review-a6a511

Auria is not even in the menu here so I had to select DirecTV DVR DTV. Someone needs to keep up with the brands. Anyway, the DTV codes for the Auria EQ5588 are: 11423, 10017,11265, 10178, 10856,11178 These are the codes. Mine worked with the first one.

What has happened is that one or more of the back light tubes were broken in shipping, AURIA used hard foam packing and the TV could not handle the shock of shipping because of BAD PACKING from AURIA. if you call customer support they will tell you that is a power supply or inverter issue but it's not it's a broken bulb, you know they know about it because they will not tell you one or the other. if you open the Samsung screen (LTA400HM01) you will see that the bottom back light bulb is broken, why AURIA will not address this issue is beyond me. don't waste you time or money on power supply or inverter boards before you look at the back light bulbs.

Lay TV on its face. Remove the plastic base cover by squeezing to release the tabs. Remove the bolts holding the base.

If this is helpful please rate.

If you ever get the base off, I'd like to buy one.

I have an Olevia 42" TV. I was able to remove the base by removing 16 screws on the back side. They were arranged vertically in 4 sets of 4. The screws go through the back panel, through the base and attach (without nuts) directly into the inside of the TV. After removing the 16 screws the stand simply slides out.
I tried removing two screws underneath the base area. They were small screws and were a pain to remove. I thought I would try that first instead of removing 16 screws but that did nothing.
Good luck!