Question about Measuring Tools & Sensors
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
there is a flap in the wii open it up. open the spot where the batteries go on the controller. the controller and the wii should have a orange butten press them both at the same time.
Posted on Aug 21, 2009
SOURCE: remote not talking to console
If your remote is giving out and not allowing you to continue , then yes it could be bad..
But, its hard to tell since you just got the system and the new remote is already bad?
If its not staying in sync, then I would try a different remote before thinking any repair options
Posted on Dec 29, 2009
I had same problem. Take all batteries out of both units. Put the batteries in the remote sensor FIRST. Then put batteries in the main unit. Within five minutes, they will link up. Problem solved!
Posted on May 11, 2010
The process is simple but too lengthy to post here. Goto homelink.com They make the system and have very complete instructions you can download. PLEASE NOTE: MOST but not ALL Brands / models of opener will work with this system. Note: when you change the battery you need to reprogram the remote.
The process is simple but too lengthy to post here.
They make the system and have very complete instructions you can download.
PLEASE NOTE: MOST but not ALL Brands / models of opener will work with this system.
Note: when you change the battery you need to reprogram the remote.
Posted on Dec 16, 2010
Open the front of the Wii, you should see a orange or reddish button, push it then push the sync button on the monitor. It should hook right up.
Posted on Jul 02, 2011
Tips for a great answer:
Oct 02, 2016 | Measuring Tools & Sensors
Feb 21, 2015 | AcuRite Acu-Rite 00754 Wireless...
Dec 03, 2014 | Acu-Rite Acurite Wireless Indooroutdoor...
Nov 01, 2014 | Acu-Rite Acurite Wireless Weather...
Nov 03, 2013 | Measuring Tools & Sensors
Jan 15, 2013 | Measuring Tools & Sensors
Double check the batteries to make sure they are installed correctly. If one of the batteries in the outdoor sending unit is in backwards, it will not send the outdoor data. On the indoor unit, there is typically one battery that is used for receiving the signal from the outdoor unit. If all of the batteries are in correctly but that one, you will see the display and the indoor temperature information, but the outdoor information will not be displayed.
Aug 21, 2010 | Acu-Rite AcuRite IndoorOutdoor Wireless...
Feb 23, 2010 | Acu-Rite Audio Players & Recorders
Aug 20, 2009 | Nintendo Wii Console
27 people viewed this question
Usually answered in minutes!