Question about Audio Players & Recorders

Open Question

Machine ejects cassettes when i put them in. does it need to be fixed to audio output before it works

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

vic richards

  • 75 Answers

SOURCE: can a tape be recorded

the machine that youare going to play the tape in you should use the video out and the audio out to the video in and audio in on the machine that you are going to record on or tape on which ever you want to call it.

Posted on Mar 07, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: aiwa cassette deck won't eject

I had this problem on an AD-S40. Turned out to be the drive belts, which had stretched, resulting in the fact that the motors couldn't drive the mechanism through it's various load cycles of opening/closing the captain roller, etc. as required to operate the mechanism. Stuck in mid-cycle, the doors would not open.

After removing the case cover, you can turn the belt driven wheels by hand to complete the cycle, so that you can eject. Then get new belts (several outfits sell belts based on length, on line). You don't need to do much to replace the belts -- after unlocking and getting the tape out, it was only a couple of screws to remove the mechanism, as a unit, and there is no need to fuse with the circuit boards and such. Easier than I expected.

Posted on Apr 20, 2009

TOLhamRadio

John

  • 509 Answers

SOURCE: cassettes being ejected automatically

The belts are probably shot in the cassette player that's 13 years old. You can probably buy another radio like it and just change out the cassette portion if you are a good electro-mechanical person.

Posted on May 27, 2010

specialistel

  • 8909 Answers

SOURCE: machine 2 years old, working

The take up spool is not turning due to aged belts or pulleys.
It is in need of a bit of TLC from an engineer with some spare parts.

Posted on Dec 28, 2010

Terry Hair

  • 4134 Answers

SOURCE: How can I fix my 2002 Honda Civic cassette player from ejecting cassettes. I tried a cassette deck cleaner and that gets ejected the same.

The auto-eject feature is normally triggered by the tape reaching its end. This causes the tape to tighten and then activates a trip lever that starts the eject cycle. Most auto tape decks that are not auto-reverse eventually have this problem. It is not usually the deck's fault, but it is with the tapes themselves. After many plays the tapes get wound too tight on the reels and drag, causing the auto-ejection. This is especially true with the thinner, larger tapes found in the C-90 and C-120 varieties. Try taking the tapes to a regular tape player and then fast-forward them from one end to the other and them a full rewind as well to loosen the tape on the spindles and re-distribute the tension. Hopefully this will work.

Posted on Sep 25, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Aiwa AD F660 cassette deck. Having changed the drive belts, the eject button does not now work. Hook holding the cassette door shut does not drop enough to release. How can I fix this? Thanks, Brian


Have you trapped wire or something near the hook mechanism stopping it from getting full travel when the button's pressed?

The nice people at HiFiengine have a service manual for the deck, free you just need to join.

HTH

Aiwa AD F660 Manual 3 Head Stereo Cassette Deck HiFi Engine

Jan 19, 2018 | Aiwa Audio Players & Recorders

1 Answer

E06 SAFE GAURD MODE


Have you tried cleaning the camera with a cleaning cassette.

You can buy one wherever they sell cameras and you just run it in the machine once or twice and it should start working.

Please let me know if you need any additional help

Thank you for using Fixya and Good luck

Apr 15, 2008 | Sony Handycam DCR-TRV330 Digital Camcorder

1 Answer

Video Cassette is being automatically ejected when I insert it for viewing


You need to take the cover off and look inside to see if there is something inside that should not be. Perhaps you can look with a flashlight through the entrance hole. You could pick up the machine and shake it and see if anything is rattling around. These things have many plastic and nylon parts which can break over time and the machine will sense a problem and eject. If you cannot find a problem by the suggestions above then it will need to go for repair-unfortunately it would probably cost more than it is worth to have it repaired.

May 16, 2014 | Goldstar GBV241 DVD Player/VCR

1 Answer

Handy cam hi8 dcr


Try removing the battery and charging it. Then put the battery back on the camera. This will reset the cassette system. The cassette should open or close depending upon what status it is in. Once you get the camera to eject fully, clean your heads with a dry head cleaner cassette for Hi8 video. If your camera is still eating tape, could be a broken pin or damaged heads.

Aug 26, 2013 | Sony Handycam DCR-TRV280 Digital Camcorder

1 Answer

I have a canon MV 830.Please could you tell me when i put the cassette into the camcorder it keeps beeping then asks me to eject the cassette. Is this expensive to fix?


My MV830 would load without a cassette; but freeze, beep 3 times and eject if a cassette was inserted. I read the following thread with a great deal of scepticism and concern that I would damage my MV830 camcorder even more; but what did I have to lose? I loaded the compartment without a cassette, hit it firmly 3 times on the tape loading side and the issue was gone. It now works perfectly! Technology is fantastic...
http://www.fixya.com/support/t238707-will_not_load_tape

Dec 06, 2010 | Canon MV830 Mini DV Digital Camcorder

1 Answer

VCR ejecting my cassettes


Try removing the top cover & have a look to see what happens when you put the tape in & press play/rewind etc. Is the take up spool (right hand spool) turning properly or is there slack tape not being taken into the cassette? Are the heads spinning ? I think your problem is more likely to do with the tape not travelling smoothly around the tape path. Possibly the clutch gears need cleaned or the soft brakes may not be dis-engaging properly.

Jul 19, 2009 | Televison & Video

2 Answers

Cassette doesn't load and move down into machine


I had the same problem. With the camera on, keep taking the battery off and putting it back on. Start to close the door and then open it. Eventually you should hear it try to move. Keep doing it and it should move down all the way.

Jun 01, 2009 | Sony DCR-HC38 Mini DV Digital Camcorder

1 Answer

C:32:11, RE-ATTACH THE POWER SOURCE


I have a Sony Handycam DCR-HC62 NTSC.The problem is i eject the cassette area, now i put back the cassette back inside the cassette area, the cassette area is not locking, and on the screen you see the eject sign , with C:32:11, stating reattached the source power. I would love if you an help me urgently please.

Apr 08, 2009 | Sony Video Cameras

1 Answer

Inserted cassete in wrong way in Sony camcorder CCDTRV68, not ejecting cassette Error codeC32:20


Sony camcorders C:31:23 error
Take the battery out and turn selection switch to camera and then turn it off. Put the battery back in and its working again.
if that doesn't work try
Try smacking the side of the camera relatively hard with the palm of your hand. Eject the tape and reinsert. You may need to do this a couple of times.
good luck
please mark the post with a fixya

Dec 24, 2007 | Sony Handycam CCD-TRV68 Camcorder

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76143 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...