Try this link:
https://www.dell.com/support/article/en-th/sln284448/how-to-troubleshoot-paper-jam-error-codes-077-100-077-101-077-102-077-103-077-900-or-077-901-on-the-3130cn-3130cdn-dell-laser-printers?lang=en
Just go with this one, I know it says Dell but if you follow the instructions it will resolve your issue.
SOURCE: TEAC MC-D95
weak or exhausted optical lens or laser assemly,needs replacement or adjustment,see a doctor.
SOURCE: I need help with xerox.
It really sounds like there is a sensor that is hanging up.
Or if its an optical sensor its dirty.
Leave the machine off for a while and inspect the fuser area for actuators in the paper path.
You may have a spring off of on of those sensor assemblys or it is hanging up on a cover.
That sounds like what you are describing since you can make one color copy.
Also, make sure your paper size settings are correct. If you have the setting different from the actual paper size in the machine, it will shut off with more or less a false jam due to the machine expecting a size paper and the paper path sensors do not see that size as the machine is running.
SOURCE: FAX ERROR MESSAGE
It sounds like the fuser rollers are not at the proper temperature to work.
They should be inspected by a technician.
SOURCE: Error code 7-402
Error codes 7-401 to 7-404 are life end for the tray rollers. If no jamming probs then enter diags mode (Back and'i' buttons and switch on) scroll down to NVRAM access and select. find CRU counters and select, clear each tray counter and then exit.
234 views
Usually answered in minutes!
×