Time button works to set time but does not work to fix time

ok posted 2 times ANON but this time, tells BMW.
so get the free manual on the car and read the radio setting features
or pull the RADIO fuse for 10mins and put back the fuse.
to reset. it.

You will need to try some combination of the set button and time button to change the time back to normal time. Try hold both the time and set button for a period of 5-10 seconds and see if this will cycle the time to normal. If not try hold the set button alone for 5-10 seconds and see if this works. If not try holding the time time button for 5-10 seconds and see if that works. If none of the fixes work. Call Emerson customer support at this telephone number 1-800-898-9020 between the hours of 9am-5pm CT. Tell them the make and model number of your Clock/Radio and ask them for assistance with your problem of resetting the time back to normal from military time. They will be able to help you. I hope this information helps you solve your problem

You have to take it apart to fix it. Bad contacts in the clock. They can be cleaned up to work, but not for long. Replace it . No fuse for the time set buttons.

There will be a reset switch button on your microwave's timer or somewhere on the appliance. Try the button and if it doesnt work then call customer care. It seems like a minor problem and can be fixed quickly..

Hello, Maureen.

According to the instructions, you set the date and time together. I'm wondering if neither work for you or if only one works.

As you are aware set the date and time;

Press the MENU button then # 1 0 1
Select the month, day and year. For today: 110711
Select the OK button

Enter the current hour and minute: 0730 (for 7:30)
For 7:30 PM, select the PM button
Select the SAVE button and then the OFF button

Hope this helps.

You will need to try some combination of the set button and time button to change the time back to normal time. Try hold both the time and set button for a period of 5-10 seconds and see if this will cycle the time to normal. If not try hold the set button alone for 5-10 seconds and see if this works. If not try holding the time time button for 5-10 seconds and see if that works. If none of the fixes work. Call Emerson customer support at this telephone number 1-800-898-9020 between the hours of 9am-5pm CT. Tell them the make and model number of your Clock/Radio and ask them for assistance with your problem of resetting the time back to normal from military time. They will be able to help you. I hope this information helps you solve your problem.

Your time needs set on your answering machine. If you have buttons on the top of your base, press and hold the day/check button to set the day of the week. Press and hold the hour button to set the hour. Press and hold the min button to set the min. If you don't have buttons on base, press flash button on handset to enter answerer remote mode. Press the 8 key to enter time set menu. Set hour and min using number buttons and set am/pm using caller id buttons. Press # pause to confirm the setting.

I found a solution on how to set the time digitally. what I did was got an old watch of mines that had the four push buttons two on each side and read what the four sides said on the old watch because my new watch didn't have any writing on either four sides. So basically the writing was similiar to how to work my new watch. The left button to the bottom was for the MODE, the upper left button was for the LIGHT, the upper right button was for START, and the lower right button was for RESET. I just worked with these buttons now that I had an idea and was able to set my digital part of the watch with a little effort. I hope that this may help someone who is having the similiar problem that I had.

If the set will not turn on with the power button on the front of the set, you must then try turning it on with the remote. You must be sure that the remote is working correctly. If the set turns on with the remote, then your power button itself is bad or has cracked loose. This is easily fixed without having to replace the board. If the set does not turn on with a working remote, then something inside the set has failed and it should be serviced by a qualified tech.