My universal remote can't program my quasar tv

http://www.remotecodelist.com/

By the way, although the sticker in the battery compartment says CL035A, the model of the remote is actually a SRU 3007. It's a big button remote

Your Device code(s) is/are:
(try all to find the best match)


0704, 0002, 0406, 0007, 0011, 0611, 0811, 0312, 0514, 0720, 0102, 0502, 0601, 0817, 0917, 0835, 0901, 0103, 0803, 0211, 0912, 0114, 0519, 0320, 0420
Here's a link to the Owners Manual too...
http://www.p4c.philips.com/files/s/sru3007_27/sru3007_27_dfu_aen.pdf

if your TV is quasar the codes are 012,038,092

Try these codes for Quasar TVs:
1003, 1054, 1055, 1070, 1109, 1170

Codes can be found here.
http://remotefinder.rca.com/default.aspx?site=rca

The manual for the remote can be found here (as of 06/07/2009):
http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/rca/rcr311-manual.zip&area=other

Basically, try holding the TV button, the on/off button should light up. Then press the digits for the code one at a time. If the code is accepted, the on/off button should go off. Finally let go of the TV button. Now try operating your TV.

[http://voxrightnow.custhelp.com/cgi-bin/voxrightnow.cfg/php/enduser/std_adp.php?p_faqid=1769&p_created=1209688350&p_sid=6-sdxLAj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9ODE4LDgxOCZwX3Byb2RzPTE1OCZwX2NhdHM9MCZwX3B2PTEuMTU4JnBfY3Y9JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1yY2Egc3lzdGVtIDUgcmVtb3RlIGNvbnRyb2w*&p_li=&p_topview=1] follow this web link it will take you to the RCA customer support web page for programming universal remote controls and lists codes under system components. The television codes for the universal remote are listed under TV. This web page should be able to help you solve your problems with the programming of the universal remote control and give you the codes needed to use it with the components in your system. Thank you for using FixYa and have a nice day!

can you please send me the tv vcr combo code for my philips remote, to the old quasar tv. thank you [email protected]

Her is the RCA Universal Remote Codes website:

http://remotefinder.rca.com/default.aspx?site=rca

Hope this helps!

go to this link it will tell you how to program the remote and the various codes. Your remote is magnavox but phillips and magnavox are one and the same.
http://www.universal-remote.net/philipsmagnavox.html

press tv button and hold it down, While holding down tv button put in code (for Quasar tv: 1054), light will go off then back on when code is entered, release tv button and now remote should be programed

I have a Phillips TV and need the code for that. I have the manual but it only lists RCA, Sony, JVC, Panasonic, Toshiba, and Sharp.